CP-Link 4

Download Video: MP4, WebM, Ogg

Download | 62 MB (MP4)

The optimum combination for remote operator interface units located up to 100 m away: Beckhoff multi-touch panel + CP-Link 4

With CP-Link 4 operating panels can be located up to 100 m away from the Industrial PC. The single-cable solution can be used to transfer video signals, USB 2.0 and the power supply in a standard CAT.6_A cable, thus reducing cable and installation costs. A further benefit is the use of purely passive displays. The CP-Link 4 technology is supported by the new Beckhoff multi-touch panel series CP29xx-0010 (built-in version) and CP39xx-0010 (mounting arm version). more

CP-Link 4 – The Two Cable Display Link

The CP29xx-0010 multi-touch built-in panels and the CP39xx-0010 multi-touch panels for mounting arm installation can be operated up to 100 m away from the PC. CP-Link 4 – The Two Cable Display Link – transfers DVI and USB together via a CAT.6_A cable. The CU8802 CP-Link 4 sender box is connected to the PC via DVI and USB, or else the C9900-E276 PCIe module for CP-Link 4 is installed in the PC.

CP-Link 4 – The Two Cable Display Link: via C9900-E276 PCIe module integrated in the PC

CP-Link 4 – The Two Cable Display Link: via CU8802 transmitter box

CP-Link 4 – The One Cable Display Link

The power supply for the Control Panel can also be provided via CP-Link 4 – The One Cable Display Link. The CU8803 CP-Link 4 sender box is used instead of the CU8802 or the PCIe module. The Control Panel remains unchanged. The CU8803 sender box provides power to the Control Panel via the CAT.6_A cable, which also transfers DVI and USB. The power supply socket of the panel is not used.