2-channel input terminal PT100 (RTD) for 2- or 3-wire connection EL3202
Error LED 2
Error LED 1 
Run LED 
Power contact
+24 V
Power contact 0 V
Top view 
Contact assembly 
extended temperature range
extended shock and vibration range 25g

EL3202 | 2-channel input terminal PT100 (RTD) for 2- or 3-wire connection

The EL3202 analog input terminal allows resistance sensors to be connected directly. The EtherCAT Terminal circuitry can operate 2- and 3-wire sensors. A microprocessor handles linearisation across the whole temperature range, which is freely selectable. The EtherCAT Terminal’s standard settings are: resolution 0.1 °C in the temperature range of PT100 sensors in 3-wire connection. The EtherCAT Terminals indicate their signal state by means of light emitting diodes. Sensor malfunctions such as broken wires are indicated by error LEDs.

Technical data EL3202 | ES3202
Number of inputs 2
Power supply via the E-bus
Distributed clocks
Input filter limit frequency typ. 1 kHz
Sensor types PT100, PT200, PT500, PT1000, Ni100, Ni120, Ni1000 resistance measurement (e.g. potentiometer, 10 Ω…1/4 kΩ), KTY sensors (types see documentation)
Connection method 2- or 3-wire (default: 3-wire)
Resolution 0.1 °C per digit
Conversion time approx. 85 ms default setting, 2…800 ms configurable
Temperature range -200…+850 °C (PT sensors); -60…+250 °C (Ni sensors)
Measuring current < 0.5 mA (load-dependent)
Measuring error < ±0.5 °C for PT sensors
Electrical isolation 500 V (E-bus/signal voltage)
Current consumption power contacts
Current consumption E-bus typ. 190 mA
Bit width in the process image 2 x 32 bit RTD input
Special features integrated digital filter, limit value monitoring, variable connection technology
Weight approx. 60 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals/markings CE, UL, ATEX
Ex-Marking II 3 G Ex nA IIC T4 Gc
Special terminals
EL3202-0010 2-channel analog input terminal, PT100 (RTD), 16 bit, high-precision
EL3202-0020 2-channel analog input terminal, PT100 (RTD), 16 bit, high-precision, with calibration certificate, calibrated version of EL3202-0010