EtherCAT Coupler, media converter (multimode fibre optic IN, RJ45 OUT) with ID switch EK1501-0100
Input for
Power LED
E-bus
Coupler
supply
Input for
power contacts
Power contacts
EtherCAT
input
SC duplex
Signal
output
EtherCAT
Power LED
coupler
ID switch
ID switch

EK1501-0100 | EtherCAT Coupler, media converter (multimode fibre optic IN, RJ45 OUT) with ID switch

The EK1501-0100 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1501-0100 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-FX to E-bus signal representation. The multimode glass fibre connection enables distances of up to 2 km between two couplers.

In addition, the coupler serves as media converter from optical fibre to copper. It is suitable for multimode optical fibre, always operates bidirectionally and collision-free with constant delay.

The EK1501-0100 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable.

Technical data EK1501-0100
Task within EtherCAT system media transition from multimode fibre optic to RJ45 copper physics and coupling of EtherCAT Terminals (ELxxxx)
Data transfer medium multimode glass fibre 50/125 µm; Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations max. 2000 m (100BASE-FX); max. 100 m (100BASE-TX)
Number of EtherCAT Terminals up to 65,534
Type/number of peripheral signals max. 4.2 GB addressable I/O points
Number of configurable IDs 4096
Protocol EtherCAT
Delay approx. 1 µs
Data transfer rates 100 Mbit/s
Configuration not required
Bus interface 1 x SC Duplex; 1 x RJ45
Power supply 24 V DC (-15 %/+20 %)
Input current 130 mA + (total E-bus current)/4
Current supply E-bus 2000 mA
Current consumption 24 V DC typ. 70 mA
Current consumption E-bus
Power contacts max. 24 V DC/max. 10 A
Weight approx. 190 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals/markings CE, UL, ATEX
Ex-Marking II 3 G Ex nA IIC T4 Gc
Accessories  
EtherCAT POF POF cordsets and connectors for EtherCAT
Cordsets cordsets and connectors
Further fibre optic products
EK1501 EtherCAT Coupler with ID switch, multimode fibre optic for E-bus terminals (ELxxxx)
EK1501-0010 EtherCAT Coupler with ID switch, singlemode fibre optic for E-bus terminals (ELxxxx), distance between stations up to 20 km
EK1521 1-port EtherCAT multi-mode fibre optic junction
EK1521-0010 1-port EtherCAT singlemode fibre optic junction, distance between stations up to 20 km
CU1521 EtherCAT media converter fibre optic, IP20
EP9521 EtherCAT/Industrial Ethernet module EP9521 for Industrial Fast Ethernet/100 Mbaud
System  
EtherCAT For further EtherCAT products please see the system overview