| A |  |
| AG1000 | Planetary gear unit for Stepper Motors AS1000 |
| AG2210 | Planetary gear units for AM3000/AM3500/AM8000/AM8500 Synchronous Servomotors |
| AG2250 | Planetary gear units for AM8100 Synchronous Servomotors |
| AG2300 | Planetary gear units for AM8000 and AM8500 Synchronous Servomotors |
| AG2800 | Planetary gear units for AM8800 stainless steel servomotors |
| AL2000 | Linear Servomotors AL2000, iron core motor, magnetic path width 80 mm, max. 10 m/s |
| AL20xx | Linear Servomotors (coil unit) |
| AL21xx | Linear Servomotors (magnet plate) |
| AL2200 | Magnetic encoder system for Linear Servomotors AL2xxx (MES) |
| AL2250 | Connector box for motor, encoder and thermal protection cables |
| AL2400 | Linear Servomotors AL2400, iron core motor, magnetic path width 50 mm, max. 8 m/s |
| AL240x | Linear Servomotors (coil unit) |
| AL25xx | Linear Servomotors (magnet plate) |
| AL2800 | Linear Servomotors AL2800, iron core motor, magnetic path width 130 mm, max. 6 m/s |
| AL28xx | Linear Servomotors (coil unit) |
| AL29xx | Linear Servomotors (magnet plate) |
| AL3800 | Linear Servomotors AL3800, ironless motor, magnetic yoke width 48 mm, max. 6 m/s |
| AL38xx | Linear Servomotors (coil unit) |
| AL39xx | Linear Servomotors (magnet yoke) |
| AM30uv-wxyz-000a | Synchronous Servomotors AM3000, for applications with highest demands on dynamics and performance |
| AM31uv-wxyz-000a | Synchronous Servomotors AM3100, optimised for use with the EL7201 servo terminal |
| AM35uv-wxyz | Synchronous Servomotors AM3500, motor with higher moment of inertia for applications with highest demands on synchronism and optimal ratio of load/motor inertia |
| AM801x | Synchronous Servomotors for applications with highest demands on dynamics and performance, One Cable Technology (OCT) for power and feedback, flange code F1 |
| AM802x | Synchronous Servomotors for applications with highest demands on dynamics and performance, One Cable Technology (OCT) for power and feedback, flange code F2 |
| AM803x | Synchronous Servomotors for applications with highest demands on dynamics and performance, One Cable Technology (OCT) for power and feedback, flange code F3 |
| AM804x | Synchronous Servomotors for applications with highest demands on dynamics and performance, One Cable Technology (OCT) for power and feedback, flange code F4 |
| AM805x | Synchronous Servomotors for applications with highest demands on dynamics and performance, One Cable Technology (OCT) for power and feedback, flange code F5 |
| AM806x | Synchronous Servomotors for applications with highest demands on dynamics and performance, One Cable Technology (OCT) for power and feedback, flange code F6 |
| AM807x | Synchronous Servomotors for applications with highest demands on dynamics and performance, One Cable Technology (OCT) for power and feedback, flange code F7 |
| AM80uv-wxyz | Synchronous Servomotors for applications with highest demands on dynamics and performance, One Cable Technology (OCT) for power and feedback |
| AM81uv-wxyz | Synchronous Servomotors suitable for operation on the EL7201-0010 OCT servo terminal |
| AM853x | Synchronous Servomotors AM8500, motor with higher moment of inertia for applications with highest demands on synchronism and optimal ratio of load/motor inertia, One Cable Technology (OCT) for power and feedback, flange code F3 |
| AM854x | Synchronous Servomotors AM8500, motor with higher moment of inertia for applications with highest demands on synchronism and optimal ratio of load/motor inertia, One Cable Technology (OCT) for power and feedback, flange code F4 |
| AM855x | Synchronous Servomotors AM8500, motor with higher moment of inertia for applications with highest demands on synchronism and optimal ratio of load/motor inertia, One Cable Technology (OCT) for power and feedback, flange code F5 |
| AM856x | Synchronous Servomotors AM8500, motor with higher moment of inertia for applications with highest demands on synchronism and optimal ratio of load/motor inertia, One Cable Technology (OCT) for power and feedback, flange code F6 |
| AM85uv-wxyz | Synchronous Servomotors AM8500, motor with higher moment of inertia for applications with highest demands on synchronism and optimal ratio of load/motor inertia, One Cable Technology (OCT) for power and feedback |
| AM883x | Stainless steel servomotors for use in the food, chemical and pharmaceutical industries, One Cable Technology (OCT) for power and feedback, flange code F3 |
| AM884x | Stainless steel servomotors for use in the food, chemical and pharmaceutical industries, One Cable Technology (OCT) for power and feedback, flange code F4 |
| AM885x | Stainless steel servomotors for use in the food, chemical and pharmaceutical industries, One Cable Technology (OCT) for power and feedback, flange code F5 |
| AM886x | Stainless steel servomotors for use in the food, chemical and pharmaceutical industries, One Cable Technology (OCT) for power and feedback, flange code F6 |
| AM88uv-wxyz | Stainless steel servomotors for use in the food, chemical and pharmaceutical industries, One Cable Technology (OCT) for power and feedback |
| AMxxxx | Drive Technology: Synchronous Servomotors AMxxxx |
| AS1010 | Stepper Motors AS1000, 0.38 Nm |
| AS1020 | Stepper Motors AS1000, 0.5 Nm |
| AS1030 | Stepper Motors AS1000, 0.6 Nm |
| AS1050 | Stepper Motors AS1000, 1.2 Nm |
| AS1060 | Stepper Motors AS1000, 5.0 Nm |
| AS10xx | Stepper Motors AS1000 |
| AT2000-xx00 | XTS starter kit |
| AT20xx-0xxx | XTS motor module, curved |
| AT20xx-0xxx | XTS motor module |
| AT9001-0550 | XTS magnetic plate set, 5-pin |
| AT9011-0050 | XTS mover |
| AT9012-0050 | XTS mover with 12 rollers |
| AT9050-xxxx | XTS guide rails, curve |
| AT90x0-xxxx | XTS guide rails |
| AX2090-BW50-xxxx | External ballast resistor for AX5x01 to AX5112 |
| AX2090-MD50 | Motor choke for Servo Drive AX5000 |
| AX2090-ND50 | Mains choke for Servo Drive AX5000 |
| AX2090-NF50 | Mains filter for Servo Drive AX5000 |
| AX2503-Bxxx | Digital Compact Servo Drive, master module, nominal output current 3 A |
| AX2506-Bxxx | Digital Compact Servo Drive, master module, nominal output current 6 A |
| AX2513-Bxxx | Digital Compact Servo Drive, master module, nominal output current 3 A |
| AX2516-Bxxx | Digital Compact Servo Drive, master module, nominal output current 6 A |
| AX2523-Bxxx | Digital Compact Servo Drive, axis module, nominal output current 3 A |
| AX2526-Bxxx | Digital Compact Servo Drive, axis module, nominal output current 6 A |
| AX25xx-Bxxx | Drive Technology: Modular servo system AX2500 |
| AX5000 | Drive Technology: Digital Compact Servo Drive AX5000 |
| AX5021 | Ballast unit with internal braking resistor and connection option for an external ballast resistor (up to 6 kW) for Servo Drive AX5000 |
| AX5101 | Digital Compact Servo Drive, 1-axis module, rated output current 1.5 A, EtherCAT interface |
| AX5103 | Digital Compact Servo Drive, 1-axis module, rated output current 3 A, EtherCAT interface |
| AX5106 | Digital Compact Servo Drive, 1-axis module, rated output current 6 A, EtherCAT interface |
| AX5112 | Digital Compact Servo Drive, 1-axis module, rated output current 12 A, EtherCAT interface |
| AX5118 | Digital Compact Servo Drive, 1-axis module, rated output current 18 A, EtherCAT interface |
| AX5125 | Digital Compact Servo Drive, 1-axis module, rated output current 25 A, EtherCAT interface |
| AX5140 | Digital Compact Servo Drive, 1-axis module, rated output current 40 A, EtherCAT interface |
| AX5160 | Digital Compact Servo Drive, 1-axis module, rated output current 60 A, EtherCAT interface |
| AX5172 | Digital Compact Servo Drive, 1-axis module, rated output current 72 A, EtherCAT interface |
| AX5190 | Digital Compact Servo Drive, 1-axis module, rated output current 90 A, EtherCAT interface |
| AX5191 | Digital Compact Servo Drive, 1-axis module, rated output current 110 A, EtherCAT interface |
| AX5192 | Digital Compact Servo Drive, 1-axis module, rated output current 143 A, EtherCAT interface |
| AX5193 | Digital Compact Servo Drive, 1-axis module, rated output current 170 A, EtherCAT interface |
| AX51xx | Digital Compact Servo Drive AX51xx, 1-axis modules |
| AX5201 | Digital Compact Servo Drive, 2-axis module, rated output current 2 x 1.5 A, EtherCAT interface |
| AX5203 | Digital Compact Servo Drive, 2-axis module, rated output current 2 x 3 A, EtherCAT interface |
| AX5206 | Digital Compact Servo Drive, 2-axis module, rated output current 2 x 6 A, EtherCAT interface |
| AX52xx | Digital Compact Servo Drive AX52xx, 2-axis modules |
| AX57xx | Encoder option cards |
| AX5801 | TwinSAFE drive option card: safe restart lock, STO, SS1; for Servo Drive AX5000 |
| AX5805 | TwinSAFE drive option card: STO, SS1, SS2, SOS, SLS, SDI; for Servo Drive AX5000 |
| AX5806 | TwinSAFE drive option card: STO, SS1, SS2, SOS, SLS, SDI; for Servo Drive AX5000 |
| AX58xx | TwinSAFE drive option cards |
| AX590x | AX-Bridge power supply module for Servo Drive AX5000 |
| AX5911 | AX-Bridge power distribution module for Servo Drive AX5000 for AX5101…AX5212 and AX5201…AX5206 |
| AX5912 | AX-Bridge power distribution module for Servo Drive AX5000 for AX5118 and AX5125 |
| AX8000 | Multi-axis servo system AX8000 |
| AX-Bridge | Quick connection system for multi-axis system |
| B | |
| BC3100 | Bus Terminal Controller for PROFIBUS system (12 Mbaud), IEC 61131-3 |
| BC3150 | Bus Terminal Controller “Compact“ for PROFIBUS system (12 Mbaud), IEC 61131-3 |
| BC5150 | Bus Terminal Controller “Compact“ for CANopen system, IEC 61131-3 |
| BC5250 | Bus Terminal Controller “Compact“ for DeviceNet system, IEC 61131-3 |
| BC7300 | Bus Terminal Controller for Modbus system, IEC 61131-3 |
| BC8050 | Bus Terminal Controller “Compact“ for RS485 system, IEC 61131-3 |
| BC8150 | Bus Terminal Controller “Compact“ for RS232 system, IEC 61131-3 |
| BC9000 | Bus Terminal Controller for Ethernet TCP/IP system, IEC 61131-3 |
| BC9020 | “Economy plus” Bus Terminal Controller for Ethernet TCP/IP system, IEC 61131-3 |
| BC9050 | Bus Terminal Controller “Compact“ with Ethernet TCP/IP interface, IEC 61131-3 |
| BC9100 | Bus Terminal Controller for Ethernet TCP/IP system with 2-channel switch, IEC 61131-3 |
| BC9120 | “Economy plus” Bus Terminal Controller for Ethernet TCP/IP system with 2-channel switch, IEC 61131-3 |
| BC9191 | Bus Terminal Controller for Ethernet TCP/IP system, IEC 61131-3, Room Controller, sub bus for EnOcean |
| BC9191-0100 | Bus Terminal Controller for Ethernet TCP/IP system, IEC 61131-3, Room Controller, RS485 interface |
| BG15xx | Bus Terminal system housing |
| BK1120 | Bus Coupler for EtherCAT system, “Economy plus“ coupler |
| BK1150 | Bus Coupler for EtherCAT system, “Compact“ coupler |
| BK1250 | Bus Coupler between E-bus and K-bus Terminals, “Compact“ coupler |
| BK2000 | Bus Coupler for Lightbus system, “Standard“ coupler |
| BK2010 | Bus Coupler for Lightbus system, “Economy“ coupler |
| BK2020 | Bus Coupler for Lightbus system, “Economy plus“ coupler |
| BK3010 | Bus Coupler for PROFIBUS system, “Economy“ coupler, 1.5 Mbaud |
| BK3100 | Bus Coupler for PROFIBUS DP/FMS system, “Standard“ coupler, 12 Mbaud |
| BK3110 | Bus Coupler for PROFIBUS system, “Economy“ coupler, 12 Mbaud |
| BK3120 | Bus Coupler for PROFIBUS system, “Economy plus“ coupler, 12 Mbaud |
| BK3150 | Bus Coupler for PROFIBUS system, “Compact“ coupler, 12 Mbaud |
| BK3520 | Bus Coupler for PROFIBUS system, “Economy plus“ coupler, fibre optic connection, 12 Mbaud |
| BK4000 | Bus Coupler for Interbus system, “Standard“ coupler |
| BK4020 | Bus Coupler for Interbus system, “Economy plus“ coupler |
| BK5110 | Bus Coupler for CANopen system, “Economy“ coupler |
| BK5120 | Bus Coupler for CANopen system, “Economy plus“ coupler |
| BK5150 | Bus Coupler for CANopen system, “Compact“ coupler |
| BK5151 | Bus Coupler for CANopen system, “Compact“ coupler, D-sub plug, 9-pin |
| BK5200 | Bus Coupler for DeviceNet system, “Standard“ coupler |
| BK5210 | Bus Coupler for DeviceNet system, “Economy“ coupler |
| BK5220 | Bus Coupler for DeviceNet system, “Economy plus“ coupler |
| BK5250 | Bus Coupler for DeviceNet system, “Compact“ coupler |
| BK7000 | Bus Coupler for ControlNet system, “Standard“ coupler |
| BK7150 | Bus Coupler for CC-Link system, “Compact“ coupler |
| BK7300 | Bus Coupler for Modbus system, “Standard“ coupler |
| BK7350 | Bus Coupler for Modbus system, “Compact“ coupler |
| BK7500 | Bus Coupler for SERCOS interface system, “Standard“ coupler |
| BK7520 | Bus Coupler for SERCOS interface system, “Economy plus“ coupler |
| BK8000 | Bus Coupler with RS485 communications interface, “Standard“ coupler |
| BK8100 | Bus Coupler with RS232 communications interface, “Standard“ coupler |
| BK9000 | Bus Coupler for Ethernet TCP/IP system, “Standard“ coupler |
| BK9050 | Bus Coupler for Ethernet TCP/IP system, “Compact“ coupler |
| BK9053 | Bus Coupler for PROFINET system, “Compact” coupler |
| BK9055 | Bus Coupler for EtherNet/IP system, “Compact“ coupler |
| BK9100 | Bus Coupler for Ethernet TCP/IP system with 2-channel switch, “Standard” coupler |
| BK9103 | Bus Coupler for PROFINET system with 2-channel switch, “Standard” coupler |
| BK9105 | Bus Coupler for EtherNet/IP system with 2-channel switch, “Standard” coupler |
| BK9500 | Bus Coupler for USB system, “Standard“ coupler |
| Built-in Control Panel | Control Panel for control cabinet installation CP6xxx |
| Built-in Panel PC | Panel PC for control cabinet installation CP62xx, CP65xx, CP66xx-xxxx-0020, CP67xx, C33xx, C36xx |
| Bus Coupler E-bus | Connection between conventional fieldbus systems and EtherCAT |
| Bus Coupler K-bus | The link between series terminals and the fieldbus |
| Bus Terminal Controller | Controller with fieldbus interface, BCxxxx, BXxxxx |
| Bus Terminals | Fieldbus-independent electronic series terminals |
| BX3100 | Bus Terminal Controller with PROFIBUS interface (12 Mbaud), IEC 61131-3 |
| BX5100 | Bus Terminal Controller with CANopen interface, IEC 61131-3 |
| BX5200 | Bus Terminal Controller with DeviceNet interface, IEC 61131-3 |
| BX8000 | Bus Terminal Controller with RS232/RS485 interface, IEC 61131-3 |
| BX9000 | Bus Terminal Controller with Ethernet interface, IEC 61131-3 |
| BZ1xxx | Labelling material for Bus Terminal Controller and Bus Coupler |
| BZ30x0 | Equipment identification label for Bus Terminals |
| BZ3200 | Slide-in label cover |
| BZ5100 | Push-in strips for removable label plates |
| C | |
| C1200 | Lightbus, ISA interface card |
| C1220 | Lightbus, ISA interface card with communications processor |
| C1300 | Lightbus, VME bus interface card |
| C3320 | 19-inch Panel PC, 12-inch LCD, numeric keypad |
| C3330 | 19-inch Panel PC, 12-inch LCD, alphanumeric keyboard |
| C3340 | 19-inch Panel PC, 15-inch LCD, numeric keypad |
| C3350 | 19-inch Panel PC, 15-inch LCD, alphanumeric keyboard |
| C3620 | Built-in Panel PC, 12-inch LCD, for ATX motherboards |
| C3640 | Built-in Panel PC, 15-inch LCD, for ATX motherboards |
| C5102 | 19-inch slide-in PC for ATX motherboards |
| C5210 | 19-inch slide-in Industrial PC for 3½-inch motherboard |
| C6140 | Control cabinet PC for ATX motherboards, short plug-in cards |
| C6150 | Control cabinet PC for ATX motherboards, long plug-in cards |
| C6240 | Control cabinet PC for ATX motherboards, 6 free slots |
| C6250 | Control cabinet PC for ATX motherboards, long plug-in cards, 6 free slots |
| C6515 | Built-in Industrial PC with external cooling |
| C6525 | Built-in Industrial PC with external cooling |
| C6640 | Control cabinet PC for ATX motherboards in compact housing |
| C6650 | Control cabinet PC for ATX motherboards in compact housing, 2 hard drive removable frames |
| C6670 | Control cabinet industrial server, 2 hard drive removable frames |
| C6915 | Fanless control cabinet Industrial PC with 3½-inch motherboard |
| C6915 | Fanless control cabinet Industrial PC with 3½-inch motherboard |
| C6920 | Control cabinet Industrial PC with 3½-inch motherboard, 1 free Mini PCI slot |
| C6925 | Fanless control cabinet Industrial PC with 3½-inch motherboard |
| C6925 | Fanless control cabinet Industrial PC with 3½-inch motherboard |
| C6925 | Fanless control cabinet Industrial PC with 3½-inch motherboard |
| C6930 | Control cabinet Industrial PC with 3½-inch motherboard, 2 hard disk slots for 2½-inch hard disks |
| C9900-A2xx | ADD-IN cards |
| C9900-E21x | RFID reader in the Control Panel front |
| C9900-E249/E25x | Slotbox for extending Industrial PCs with two plug-in card slots |
| C9900-E270 | USB extender Tx module for CP69xx and CP79xx sends USB signals to the receiver box CU8850 |
| C9900-E271 | USB extender 2.0 Tx module for CP29xx-0000 and CP39xx-0000 sends USB signals to the receiver box CU8851 |
| C9900-E276 | PCIe module for CP-Link 4 – The Two Cable Display Link |
| C9900-E277 | PCIe module for USB 3.0, 2 ports |
| C9900-E78x | PLC or CNC push-button extension for tool machines |
| C9900-Ex0x | Push-button extension for Control Panel and Panel PCs with 12-inch display and numeric keyboard |
| C9900-Ex1x | Push-button extension for Control Panel and Panel PCs with 12-inch display and alphanumeric keyboard |
| C9900-Ex2x | Push-button extension for Control Panel and Panel PCs with 19-inch display without keyboard |
| C9900-Ex3x | Push-button extension for Control Panel and Panel PCs with 19-inch display and function keys |
| C9900-Ex4x | Push-button extension for Control Panel and Panel PCs with 15-inch display without keyboard |
| C9900-Ex5x | Push-button extension for Control Panel and Panel PCs with 15-inch display and function keys |
| C9900-Ex6x | Push-button extension for Control Panel and Panel PCs with 15-inch display and numeric keyboard |
| C9900-Ex7x | Push-button extension for Control Panel and Panel PCs with 15-inch display and alphanumeric keyboard |
| C9900-Ex96 | Push-button extension for Control Panel and Panel PCs with 19-inch display and numeric keyboard |
| C9900-Ex97 | Push-button extension for Control Panel and Panel PCs with 19-inch display and alphanumeric keyboard |
| C9900-Exxx | Push-button extension for Control Panel and Panel PCs |
| C9900-G00x, -G01x | Push-button extension for CP2xxx |
| C9900-G02x, -G03x | Push-button extension for CP39xx |
| C9900-H3xx | USB sticks, USB 3.0 with 4…32 GB |
| C9900-H5xx | CFast cards, 4...64 GB, SLC flash, extended temperature range |
| C9900-L100 | License key USB stick for TwinCAT 3.1 |
| C9900-M3x0 | Holder for additional Control Panel keyboard |
| C9900-M400 | Keyboard shelf for the Control Panel |
| C9900-M406 | Keyboard shelf for the CP3xxx multi-touch Control Panels and Panel PCs |
| C9900-T90x | Touch screen pen with holder for Control Panel and Industrial PC |
| C9900-U330 | Maintenance-free 24 V battery pack with 3.4 Ah |
| C9900-U332-0010 | Compact 24 V battery pack with 1.3 Ah for PCs with Intel® Atom™ processor |
| CANopen Bus Coupler K-bus | Bus Coupler for CANopen system, BK5110, BK5120, BK5150, BK5151, LC5100, BC5150, BX5100 |
| CANopen Fieldbus Box | Fieldbus Box for CANopen system, IPxxxx-B51x, IL230x-B51x |
| CANopen PC cards | PC Fieldbus Cards with PCI bus for CANopen system, FC5101, FC5102, FC5151 |
| CANopen PCIe cards | PCI Express Fieldbus Cards, FC5121, FC5122 |
| CB1056 | ATX Industrial Motherboard, PGA889, Intel® Celeron®/Core™ i3/Core ™ i5/Core™ i7 |
| CB1061 | ATX Industrial Motherboard, Intel® Celeron®/Core™ i3/Core™ i5/Core™ i7, 4th Generation |
| CB3056 | 3½-inch Industrial Motherboard, Intel® Celeron®/Core™ i3/Core™ i5/Core™ i7 |
| CB3060 | 3½-inch Industrial Motherboard, Intel® Celeron®/Core™ i3/Core™ i5/Core™ i7, 4th Generation |
| CB3063 | 3½-inch Industrial Motherboard, Intel® Atom™ E38xx |
| CC-Link Bus Coupler K-bus | Bus Coupler for CC-Link, BK7150 |
| ControlNet Bus Coupler K-bus | Bus Coupler for ControlNet, BK7000 |
| Control Panel | Operating and display elements for Industrial PCs |
| CP22xx | Multi-touch built-in Panel PC CP22xx with 3½-inch motherboard |
| CP26xx | Dual-touch built-in Panel PC with ARM Cortex™-A8 |
| CP27xx | Fanless multi-touch built-in Panel PC CP27xx with 3½-inch motherboard |
| CP27xx | Fanless multi-touch built-in Panel PC CP27xx with 3½-inch motherboard |
| CP29xx-0000 | Multi-touch built-in Control Panel with DVI/USB extended interface |
| CP32xx | Multi-touch Panel PC with 3½-inch motherboard |
| CP37xx | Multi-touch Panel PC with 3½-inch motherboard and Intel® Atom™ |
| CP39xx-0000 | Multi-touch Control Panel with DVI/USB extended interface |
| CP600x | Built-in Control Panel, CP-Link interface, without keyboard |
| CP601x | Built-in Control Panel, CP-Link interface, function keys |
| CP602x | Built-in Control Panel, CP-Link interface, function keys and numeric keypad |
| CP603x | Built-in Control Panel, CP-Link interface, function keys and alphanumeric keypad |
| CP60xx | Built-in Control Panel, CP-Link interface |
| CP620x | “Economy” built-in Panel PC with 3½-inch motherboard, without keyboard |
| CP621x | “Economy” built-in Panel PC with 3½-inch motherboard, function keys |
| CP622x | “Economy” built-in Panel PC with 3½-inch motherboard, numeric keyboard |
| CP623x | “Economy” built-in Panel PC with 3½-inch motherboard, alphanumeric keyboard |
| CP624x | “Economy” built-in Panel PC with 3½-inch motherboard, alphanumeric keyboard, 16 special PLC keys on the sides |
| CP62xx | “Economy” built-in Panel PC with 3½-inch motherboard |
| CP650x | Built-in Panel PC with ATX motherboard, without keyboard |
| CP651x | Built-in Panel PC with ATX motherboard, function keys |
| CP652x | Built-in Panel PC with ATX motherboard, numeric keyboard |
| CP653x | Built-in Panel PC with ATX motherboard, alphanumeric keyboard |
| CP654x | Built-in Panel PC with ATX motherboard, alphanumeric keyboard, 16 special PLC keys on the sides |
| CP65xx | Built-in Panel PC with ATX motherboard |
| CP66xx | Built-in Panel PC with ARM Cortex™-A8 |
| CP670x | Built-in Panel PC, without keyboard |
| CP671x | Built-in Panel PC, function keys |
| CP672x | Built-in Panel PC, numeric keypad |
| CP673x | Built-in Panel PC, alphanumeric keyboard |
| CP67xx | Built-in Panel PC |
| CP680x | Built-in Control Panel, DVI/USB interface, without keyboard |
| CP681x | Built-in Control Panel, DVI/USB interface, function keys |
| CP682x | Built-in Control Panel, DVI/USB interface, numeric keypad |
| CP683x | Built-in Control Panel, DVI/USB interface, alphanumeric keyboard |
| CP684x | Built-in Control Panel, DVI/USB interface, alphanumeric keyboard, 16 special PLC keys on the sides |
| CP68xx | Built-in Control Panel, DVI/USB interface |
| CP690x | “Economy” built-in Control Panel with DVI/USB Extended interface, without keyboard |
| CP691x | “Economy” built-in Control Panel with DVI/USB Extended interface, function keys |
| CP692x | “Economy” built-in Control Panel with DVI/USB Extended interface, numeric keypad |
| CP693x | “Economy” built-in Control Panel with DVI/USB Extended interface, alphanumeric keyboard |
| CP694x | “Economy” built-in Control Panel with DVI/USB Extended interface, alphanumeric keyboard, 16 special PLC keys on the sides |
| CP69xx | “Economy” built-in Control Panel with DVI/USB Extended interface |
| CP6xxx | Built-in Control Panel |
| CP700x | Control Panel, CP-Link interface, without keyboard |
| CP701x | Control Panel, CP-Link interface, function keys |
| CP702x | Control Panel, CP-Link interface, function keys, numeric keypad |
| CP703x | Control Panel, CP-Link interface, function keys, alphanumeric keyboard |
| CP70xx | Control Panel, CP-Link interface |
| CP720x | “Economy” Panel PC with 3½-inch motherboard, IP 65, without keyboard |
| CP720x | “Economy” Panel PC with 3½-inch motherboard, IP 65, without keyboard |
| CP721x | “Economy” Panel PC with 3½-inch motherboard, IP 65, function keys |
| CP722x | “Economy” Panel PC with 3½-inch motherboard, IP 65, numeric keyboard |
| CP723x | “Economy” Panel PC with 3½-inch motherboard, IP 65, alphanumeric keyboard |
| CP724x | “Economy” Panel PC with 3½-inch motherboard, IP 65, alphanumeric keyboard, 16 special PLC keys on the sides |
| CP72xx | “Economy” Panel PC with 3½-inch motherboard, IP 65 |
| CP7701-140x | Stainless steel Panel PC in IP 65 with 12-inch display |
| CP7702-140x | Stainless steel Panel PC in IP 65 with 15-inch display |
| CP7703-140x | Stainless steel Panel PC in IP 65 with 19-inch display |
| CP770x | Panel PC, without keyboard |
| CP771x | Panel PC, function keys |
| CP772x | Panel PC, numeric keypad |
| CP773x | Panel PC, alphanumeric keyboard |
| CP77xx | Panel PC |
| CP780x | Control Panel, DVI/USB interface, without keyboard |
| CP781x | Control Panel, DVI/USB interface, function keys |
| CP782x | Control Panel, DVI/USB interface, numeric keypad |
| CP783x | Control Panel, DVI/USB interface, alphanumeric keyboard |
| CP784x | Control Panel, DVI/USB interface, alphanumeric keyboard, 16 special PLC keys on the sides |
| CP78xx | Control Panel, DVI/USB interface |
| CP7901-140x | Stainless steel Control Panel in IP 65 with 12-inch display |
| CP7902-140x | Stainless steel Control Panel in IP 65 with 15-inch display |
| CP7903-140x | Stainless steel Control Panel in IP 65 with 19-inch display |
| CP790x | “Economy” Control Panel with DVI/USB Extended interface, without keyboard |
| CP791x | “Economy” Control Panel with DVI/USB Extended interface, function keys |
| CP792x | “Economy” Control Panel with DVI/USB Extended interface, numeric keypad |
| CP793x | “Economy” Control Panel with DVI/USB Extended interface, alphanumeric keyboard |
| CP794x | “Economy” Control Panel with DVI/USB Extended interface, alphanumeric keyboard, 16 special PLC keys on the sides |
| CP79xx | “Economy” Control Panel with DVI/USB Extended interface |
| CP7xxx | Control Panel |
| CP-Link 3 | Ethernet- and IP protocol-based desktop transfer software |
| CP-Link 4 | The One Cable Display Link |
| CU1128 | EtherCAT infrastructure, EtherCAT junction |
| CU1521 | EtherCAT infrastructure, EtherCAT media converter multimode fibre optic |
| CU1561 | EtherCAT infrastructure, EtherCAT media converter plastic optic fibre |
| CU2005 | Ethernet Switch, 5 ports, 10/100 Mbit/s, IP 20 |
| CU2008 | Ethernet Switch, 8 ports, 10/100 Mbit/s, IP 20 |
| CU2016 | Ethernet Switch, 16 ports, 10/100 Mbit/s, IP 20 |
| CU2208 | Ethernet Switch, 8 ports, 10/100/1000 Mbit/s, IP 20 |
| CU2508 | Real-time Ethernet port multiplier |
| CU2608 | Ethernet Switch, 8 ports, 10/100 Mbit/s, IP 67 |
| CU8005 | USB hub with 4 USB 2.0 downstream ports |
| CU8006 | USB hub with 4 USB 3.0 downstream ports |
| CU8800 | USB extender Tx sends USB signals to the receiver box CU8850 |
| CU8801 | USB extender 2.0 Tx sends USB signals to the receiver box CU8851 |
| CU8802 | Transmitter box for CP-Link 4 – The Two Cable Display Link |
| CU8803 | Transmitter box for CP-Link 4 – The One Cable Display Link |
| CU8810 | DVI splitter with 4-port USB hub, freely configurable 2:4 switch with cable drivers for multi-monitor displays |
| CU8815 | DVI splitter, freely configurable 2:4 switch with cable drivers for multi-monitor displays |
| CU8850 | USB extender Rx receives USB signals from sending box CU8800 |
| CU8851 | USB extender 2.0 Rx receives USB signals from sending box CU8801 |
| CU8870 | Extension module for usage of a mass storage Compact Flash card |
| CU8871 | Extension module for usage of a mass storage CFast card |
| CU8880 | Ethernet controller with USB input |
| CX1010 | Embedded PC CX1010, 500 MHz Pentium® MMX-compatible processor |
| CX1010-0xxx | Embedded PC CX1010, basic CPU module |
| CX1010-N010 | Embedded PC CX1010, system interface, USB/DVI |
| CX1010-N020 | Embedded PC CX1010, system interface, Audio |
| CX1010-N030 | Embedded PC CX1010, system interface, COM1/COM2 RS232 interface module |
| CX1010-N031 | Embedded PC CX1010, system interface, COM1/COM2 RS422/485 interface module |
| CX1010-N040 | Embedded PC CX1010, system interface, COM3/COM4 RS232 interface module |
| CX1010-N041 | Embedded PC CX1010, system interface, COM3/COM4 RS422/485 interface module |
| CX1010-N060 | Embedded PC CX1010, system interface, 10/100 Mbit Ethernet interface module |
| CX1010-N0xx | Embedded PC CX1010, system interfaces |
| CX1020 | Embedded PC CX1020, 1 GHz Intel® Celeron® M ULV processor |
| CX1020-0xxx | Embedded PC CX1020, basic CPU module |
| CX1020-N010 | Embedded PC CX1020, system interface, DVI/USB interface module |
| CX1020-N020 | Embedded PC CX1020, system interface, Audio interface module |
| CX1020-N030 | Embedded PC CX1020, system interface, COM1/COM2 RS232 interface module |
| CX1020-N031 | Embedded PC CX1020, system interface, COM1/COM2 RS422/485 interface module |
| CX1020-N040 | Embedded PC CX1020, system interface, COM3/COM4 RS232 interface module |
| CX1020-N041 | Embedded PC CX1020, system interface, COM3/COM4 RS422/485 interface module |
| CX1020-N060 | Embedded PC CX1020, system interface, 10/100 Mbit Ethernet interface module |
| CX1020-N0xx | Embedded PC CX1010, system interfaces |
| CX1030 | Embedded PC CX1030, 1.8 GHz Intel® Pentium® M processor |
| CX1030-0xxx | Embedded PC CX1030, basic CPU module |
| CX1030-N010 | Embedded PC CX1030, system interface, DVI/USB interface module |
| CX1030-N020 | Embedded PC CX1030, system interface, Audio interface module |
| CX1030-N030 | Embedded PC CX1030, system interface, COM1/COM2 RS232 interface module |
| CX1030-N031 | Embedded PC CX1030, system interface, COM1/COM2 RS422/485 interface module |
| CX1030-N040 | Embedded PC CX1030, system interface, COM3/COM4 RS232 interface module |
| CX1030-N041 | Embedded PC CX1030, system interface, COM3/COM4 RS422/485 interface module |
| CX1030-N060 | Embedded PC CX1030, system interface, 10/100 Mbit Ethernet interface module |
| CX1030-N0xx | Embedded PC CX1030, system interfaces |
| CX1100-0001 | Embedded PC CX1010/CX1020, power supply |
| CX1100-0002 | Embedded PC CX1010/CX1020, power supply with K-bus interface |
| CX1100-0003 | Embedded PC CX1010/CX1020, power supply with K-bus/IP-Link interface |
| CX1100-0004 | Embedded PC CX1010/CX1020, power supply with E-bus interface |
| CX1100-0012 | Embedded PC CX1030, power supply with K-bus interface |
| CX1100-0013 | Embedded PC CX1030, power supply with K-bus/IP-Link interface |
| CX1100-0014 | Embedded PC CX1030, power supply with E-bus interface |
| CX1100-00xx | Embedded PC CX1010/CX1020/CX1030, power supply units and I/O interfaces |
| CX1100-09x0 | Embedded PC CX, UPS module |
| CX1500-B200 | Embedded PC CX1010/CX1020/CX1030, Lightbus slave fieldbus connection |
| CX1500-B310 | Embedded PC CX1010/CX1020/CX1030, PROFIBUS slave fieldbus connection |
| CX1500-B510 | Embedded PC CX1010/CX1020/CX1030, CANopen slave fieldbus connection |
| CX1500-B520 | Embedded PC CX1010/CX1020/CX1030, DeviceNet slave fieldbus connection |
| CX1500-Bxx0 | Embedded PC CX1000/CX1010/CX1020/CX1030, slave fieldbus connections |
| CX1500-M200 | Embedded PC CX1010/CX1020/CX1030, Lightbus master fieldbus connection |
| CX1500-M310 | Embedded PC CX1010/CX1020/CX1030, PROFIBUS master fieldbus connection |
| CX1500-M510 | Embedded PC CX1010/CX1020/CX1030, CANopen master fieldbus connection |
| CX1500-M520 | Embedded PC CX1010/CX1020/CX1030, DeviceNet master fieldbus connection |
| CX1500-M750 | Embedded PC CX1010/CX1020/CX1030, SERCOS interface master fieldbus connection |
| CX1500-Mxx0 | Embedded PC CX1000/CX1010/CX1020/CX1030, master fieldbus connections |
| CX2020 | Embedded PC CX2020, processor Intel® Celeron® 1.4 GHz clock frequency, 1 core |
| CX2030 | Embedded PC CX2030, processor Intel® Core™ i7 1.5 GHz clock frequency, 2 cores |
| CX2040 | Embedded PC CX2040, processor Intel® Core™ i7 2.1 GHz clock frequency, 4 cores |
| CX2100-0xxx | Embedded PC CX2000, power supply units and UPS modules |
| CX2500-00xx | Embedded PC CX2000, system modules |
| CX2500-B310 | Embedded PC CX2020/CX2030/CX2040, PROFIBUS slave fieldbus connection |
| CX2500-B510 | Embedded PC CX2020/CX2030/CX2040, CANopen slave fieldbus connection |
| CX2500-M310 | Embedded PC CX2020/CX2030/CX2040, PROFIBUS master fieldbus connection |
| CX2500-M510 | Embedded PC CX2020/CX2030/CX2040, CANopen master fieldbus connection |
| CX2550-0010 | Embedded PC CX2020/CX2030/CX2040, extension module, CFast |
| CX2550-0020 | Embedded PC CX2020/CX2030/CX2040, extension module, 2½-inch HDD/SSD |
| CX2550-0x79 | Embedded PC CX2020/CX2030/CX2040, extension modules, USB extension |
| CX5010 | Embedded PC CX5010, processor Intel® Atom™ Z510, 1.1 GHz clock frequency |
| CX5020 | Embedded PC CX5020, processor Intel® Atom™ Z530, 1.6 GHz clock frequency |
| CX5120 | Embedded PC CX5120, processor Intel® Atom™ E3815, 1.46 GHz clock frequency, 1 core |
| CX5130 | Embedded PC CX5130, processor Intel® Atom™ E3827, 1.75 GHz clock frequency, 2 cores |
| CX5140 | Embedded PC CX5140, processor Intel® Atom™ E3845, 1.91 GHz clock frequency, 4 cores |
| CX8000 | Embedded PCs CX8000, 32 bit processor ARM, 400 MHz clock frequency |
| CX8010 | Embedded PC CX8010 for EtherCAT |
| CX8030 | Embedded PC CX8030 for PROFIBUS, master |
| CX8031 | Embedded PC CX8031 for PROFIBUS |
| CX8050 | Embedded PC CX8050 for CANopen, master |
| CX8051 | Embedded PC CX8051 for CANopen |
| CX8080 | Embedded PC CX8080 for RS232/RS485 |
| CX8090 | Embedded PC CX8090 for Ethernet |
| CX8091 | Embedded PC CX8091 for BACnet/IP and OPC UA |
| CX8093 | Embedded PC CX8093 for PROFINET |
| CX8095 | Embedded PC CX8095 for EtherNet/IP |
| CX9000 | Embedded PC CX9000, 266 MHz Intel® IXP420 CPU with XScale® technology |
| CX9000 | Embedded PC CX9000, 266 MHz Intel® IXP420 CPU with XScale® technology |
| CX900x-000x | Embedded PC CX9000, E-bus interface (for EtherCAT Terminals) |
| CX900x-100x | Embedded PC CX9000, K-bus interface (for Bus Terminals) |
| CX900x-x00x | Embedded PC CX9000, basic CPU module |
| CX9010 | Embedded PC CX9010, 533 MHz Intel® IXP420 CPU with XScale® technology |
| CX901x-000x | Embedded PC CX9010, E-bus interface (for EtherCAT Terminals) |
| CX901x-100x | Embedded PC CX9010, K-bus interface (for Bus Terminals) |
| CX901x-x00x | Embedded PC CX9010, basic CPU module |
| CX9020 | Embedded PC CX9020, 1 GHz ARM Cortex™-A8 |
| CX90x0-A001 | Embedded PC CX9000/CX9010, system interface, Compact Flash extension module |
| CX90x0-A001/N0xx | Embedded PC CX9000/CX9010, system interfaces |
| CX90x0-N010 | Embedded PC CX9000/CX9010, system interface, DVI/USB interface module |
| CX90x0-N030 | Embedded PC CX9000/CX9010, system interface, COM1/COM2 RS232 interface module |
| CX90x0-N031 | Embedded PC CX9000/CX9010, system interface, COM1/COM2 RS422/485 interface module |
| CX90x0-N070 | Embedded PC CX9000/CX9010, system interface, 4-port USB hub |
| D | |
| DeviceNet Bus Coupler K-bus | Bus Coupler for DeviceNet system, BK52x0, LC5200, BC5250, BX5200 |
| DeviceNet Fieldbus Box | Fieldbus Box for DeviceNet system, IPxxxx-B52x, IL230x-B52x |
| DeviceNet PC cards | PC Fieldbus Cards with PCI bus for DeviceNet system, FC5201, FC5202, FC5251 |
| DIN rail PC | DIN rail PC CX8000, CX9000, CX9010, CX9020, CX5010, CX5020, CX5120, CX5130, CX5140, CX1000, CX1010, CX1020, CX1030, CX2020, CX2030, CX2040 |
| Drive Technology | Servo Drives AX5000, AX8000, AX2500, Servomotors AM8000, AM8100, AM8500, AM8800, AM3000, AM3100, AM3500, AM2000, AL2000, AL2400, AL2800, AL3800, Stepper Motors AS1000 |
| E | |
| EJ1008 | EtherCAT plug-in module, 8-channel digital input 24 V DC, 3.0 ms |
| EJ1100 | EtherCAT plug-in module, EtherCAT Coupler for E-Bus-terminals (ELxxxx) |
| EJ1809 | EtherCAT plug-in module, 16-channel digital input 24 V DC, 3.0 ms |
| EJ1859 | EtherCAT plug-in module, 8-channel digital input + 8-channel digital output 24 V DC |
| EJ1889 | EtherCAT plug-in module, 16-channel digital input 24 V DC, 3.0 ms, 0 V (ground) switching |
| EJ2008 | EtherCAT plug-in module, 8-channel digital output 24 V DC, 0.5 A |
| EJ2502 | EtherCAT plug-in module, 2-channel pulse width output 24 V DC, 0.5 A |
| EJ2809 | EtherCAT plug-in module, 16-channel digital output 24 V DC, 0.5 A |
| EJ2889 | EtherCAT plug-in module, 16-channel digital output 24 V DC, 0.5 A, 0 V (ground) switching |
| EJ3004 | EtherCAT plug-in module, 4-channel analog input -10…+10 V, single-ended, 12 bit |
| EJ3108 | EtherCAT plug-in module, 8-channel analog input -10…+10 V, 6 x differential input, 2 x single-ended, 16 bit |
| EJ3202 | EtherCAT plug-in module, 2-channel analog input PT100 (RTD) |
| EJ3214 | EtherCAT plug-in module, 4-channel analog input PT100 (RTD) |
| EJ4002 | EtherCAT plug-in module, 2-channel analog output 0…10 V, 12 bit |
| EJ4134 | EtherCAT plug-in module, 4-channel analog output -10…+10 V, 16 bit |
| EJ7047 | EtherCAT plug-in module, stepper motor module 50 V DC, 5 A, with incremental encoder, vector control |
| EJ7211-0010 | EtherCAT plug-in module, servomotor module with OCT, 50 V DC, 4.5 ARMS |
| EJ7342 | EtherCAT plug-in module, 2-channel DC motor output stage 50 V DC, 3.5 A |
| EJ9001 | EtherCAT plug-in module, placeholder module |
| EJ9576 | EtherCAT plug-in module, brake chopper module |
| EK1100 | EtherCAT Coupler |
| EK1101 | EtherCAT Coupler with ID switch for E-bus terminals |
| EK1101-0080 | EtherCAT Coupler with ID switch for E-bus terminals, Fast Hot Connect |
| EK1110 | EtherCAT extension |
| EK1122 | EtherCAT junction, 2-port |
| EK1122-0080 | EtherCAT junction, 2-port, Fast Hot Connect |
| EK1501 | EtherCAT Coupler with ID switch, multimode fibre optic for E-bus terminals |
| EK1501-0010 | EtherCAT Coupler with ID switch, singlemode fibre optic for E-bus terminals |
| EK1521 | EtherCAT multimode fibre optic junction, 1-port |
| EK1521-0010 | EtherCAT singlemode fibre optic junction, 1-port |
| EK1541 | EtherCAT Coupler with ID switch, plastic optical fibre for E-bus terminals |
| EK1561 | EtherCAT plastic optical fibre junction, 1-port |
| EK1814 | EtherCAT Coupler with 4 integrated digital inputs and 4 integrated digital outputs |
| EK1818 | EtherCAT Coupler with 8 integrated digital inputs and 4 integrated digital outputs |
| EK1828 | EtherCAT Coupler with 4 integrated digital inputs and 8 integrated digital outputs |
| EK1828-0010 | EtherCAT Coupler with 8 integrated digital outputs |
| EK1914 | EtherCAT Coupler with integrated digital standard and safety I/Os |
| EK1960 | TwinSAFE Compact Controller |
| EK3100 | PROFIBUS Bus Coupler for EtherCAT Terminals |
| EK9000 | Ethernet Bus Coupler for EtherCAT Terminals |
| EK9300 | PROFINET RT Bus Coupler for EtherCAT Terminals |
| EK9500 | EtherNet/IP Bus Coupler for EtherCAT Terminals |
| EL1002 | ES1002 | EtherCAT Terminal, 2-channel digital input 24 V DC, 3.0 ms filter |
| EL1004 | ES1004 | EtherCAT Terminal, 4-channel digital input 24 V DC, 3.0 ms filter |
| EL1004-0020 | EtherCAT Terminal, 4-channel digital input 24 V DC, 3.0 ms filter, 2500 V |
| EL1008 | ES1008 | EtherCAT Terminal, 8-channel digital input 24 V DC, 3.0 ms filter |
| EL1012 | ES1012 | EtherCAT Terminal, 2-channel digital input 24 V DC, 10 µs filter |
| EL1014 | ES1014 | EtherCAT Terminal, 4-channel digital input 24 V DC, 10 µs filter |
| EL1018 | ES1018 | EtherCAT Terminal, 8-channel digital input 24 V DC, 10 µs filter |
| EL1024 | ES1024 | EtherCAT Terminal, 4-channel digital input 24 V DC, filter 3.0 ms |
| EL1034 | ES1034 | EtherCAT Terminal, 4-channel digital input 24 V DC, potential-free inputs, filter 10 µs |
| EL1084 | ES1084 | EtherCAT Terminal, 4-channel digital input 24 V DC, negative switching, filter 3.0 ms |
| EL1088 | ES1088 | EtherCAT Terminal, 8-channel digital input 24 V DC, negative switching, filter 3.0 ms |
| EL1094 | ES1094 | EtherCAT Terminal, 4-channel digital input 24 V DC, negative switching, filter 10 µs |
| EL1098 | ES1098 | EtherCAT Terminal, 8-channel digital input 24 V DC, negative switching, filter 10 µs |
| EL1104 | ES1104 | EtherCAT Terminal, 4-channel digital input 24 V DC, filter 3.0 ms |
| EL1114 | ES1114 | EtherCAT Terminal, 4-channel digital input 24 V DC, filter 10 µs |
| EL1124 | ES1124 | EtherCAT Terminal, 4-channel digital input 5 V DC, filter 10 µs |
| EL1134 | ES1134 | EtherCAT Terminal, 4-channel digital input 48 V DC, filter 10 µs |
| EL1144 | ES1144 | EtherCAT Terminal, 4-channel digital input 12 V DC, filter 10 µs |
| EL1202 | ES1202 | EtherCAT Terminal, 2-channel digital input 24 V DC, TON/TOFF 1µs |
| EL1252 | ES1252 | EtherCAT Terminal, 2-channel digital input 24 V DC, filter 10 µs, with time stamp |
| EL1258 | EtherCAT Terminal, 8-channel digital input 24 V DC, filter 1 µs, with multi- timestamping |
| EL1259 | EtherCAT Terminal, 8 digital inputs + 8 digital outputs 24 V DC, filter 1 µs, 0.5 A, with multi-timestamping |
| EL1262 | ES1262 | EtherCAT Terminal, 2-channel digital input 24 V DC, filter 3.0 ms, with oversampling |
| EL1382 | ES1382 | EtherCAT Terminal, 2 digital inputs, thermistor |
| EL1502 | ES1502 | EtherCAT Terminal, up/down counter 24 V DC, 100 kHz, 32 bit counter depth |
| EL1512 | ES1512 | EtherCAT Terminal, 2-channel, up/down counter, 24 V DC, 1 kHz, 16 bit counter |
| EL1702 | ES1702 | EtherCAT Terminal, 2-channel digital input 120…230 V AC |
| EL1712 | ES1712 | EtherCAT Terminal, 2-channel digital input 120 V AC/DC |
| EL1722 | ES1722 | EtherCAT Terminal, 2-channel digital input 120…230 V AC, no power contacts |
| EL1804 | EtherCAT Terminal, 4-channel digital input 24 V DC, 8 x 24 V DC, 4 x 0 V DC, 3.0 ms filter, 3-wire connection |
| EL1808 | EtherCAT Terminal, 8-channel digital input 24 V DC, 8 x 24 V DC, 3.0 ms filter, 2-wire connection |
| EL1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, filter 3.0 ms, type 3 |
| EL1814 | EtherCAT Terminal, 4-channel digital input 24 V DC, 8 x 24 V DC, 4 x 0 V DC, filter typ. 10 µs, 3-wire connection |
| EL1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, filter typ. 10 µs, type 3 |
| EL1859 | EtherCAT Terminal, 8 digital inputs + 8 digital outputs 24 V DC, filter 3.0 ms, type 3, 0.5 A |
| EL1862 | EtherCAT Terminal, 16-channel digital input 24 V DC, filter 3.0 ms, flat-ribbon cable connection, type 3 |
| EL1872 | EtherCAT Terminal, 16-channel digital input 24 V DC, filter typ. 10 µs, flat-ribbon cable connection, type 3 |
| EL1889 | EtherCAT Terminal, 16-channel digital input 24 V DC, filter 3.0 ms, 0 V (ground) switching |
| EL1904 | EtherCAT Terminal, 4 fail-safe inputs, TwinSAFE, 24 V DC |
| EL2002 | ES2002 | EtherCAT Terminal, 2-channel digital output 24 V DC, 0.5 A |
| EL2004 | ES2004 | EtherCAT Terminal, 4-channel digital output 24 V DC, 0.5 A |
| EL2008 | ES2008 | EtherCAT Terminal, 8-channel digital output 24 V DC, 0.5 A |
| EL2022 | ES2022 | EtherCAT Terminal, 2-channel digital output 24 V DC, 2 A |
| EL2024 | ES2024 | EtherCAT Terminal, 4-channel digital output 24 V DC, 2 A |
| EL2032 | ES2032 | EtherCAT Terminal, 2-channel digital output 24 V DC, 2 A |
| EL2034 | ES2034 | EtherCAT Terminal, 4-channel digital output 24 V DC, 2 A with diagnostics |
| EL2042 | ES2042 | EtherCAT Terminal, 2-channel digital output 24 V DC, 2 x 4 A/1 x 8 A |
| EL2084 | ES2084 | EtherCAT Terminal, 4-channel digital output 24 V DC, negative switching, 0.5 A |
| EL2088 | ES2088 | EtherCAT Terminal, 8-channel digital output 24 V DC, 0.5 A, negative switching |
| EL2124 | ES2124 | EtherCAT Terminal, 4-channel digital output 5 V DC, 0.02 A |
| EL2202 | ES2202 | EtherCAT Terminal, 2-channel digital output 24 V DC, TON/TOFF 1 μs, push-pull outputs |
| EL2212 | ES2212 | EtherCAT Terminal, 2-channel digital output terminal 24…72 V DC with overexcitation, multi-timestamp |
| EL2252 | ES2252 | EtherCAT Terminal, 2-channel digital output 24 V DC, 0.5 A, with time stamp, tri-state |
| EL2258 | EtherCAT Terminal, 8-channel digital output 24 V DC, 0.5 A, with time stamp |
| EL2262 | ES2262 | EtherCAT Terminal, 2-channel digital output 24 V DC, 0.5 A, high-speed outputs with oversampling |
| EL2502 | ES2502 | EtherCAT Terminal, 2-channel pulse width output 24 V DC |
| EL2521 | ES2521 | EtherCAT Terminal, 1-channel pulse train output terminal, 2 RS422 outputs (5 V level) |
| EL2521-0024 | ES2521-0024 | EtherCAT Terminal, 1-channel pulse train output terminal, 2 outputs 24 V DC (supplied from an external source) |
| EL2521-0025 | EtherCAT Terminal, 1-channel pulse train output terminal, 24 V DC (supplied from an external source), negative switching |
| EL2521-0124 | EtherCAT Terminal, 1-channel pulse train output terminal, 2 RS422 outputs (5 V level) |
| EL2522 | EtherCAT Terminal, incremental encoder simulation terminal (pulse train) |
| EL2535 | ES2535 | EtherCAT Terminal, 2-channel pulse width current terminal 24 V DC, 1 A |
| EL2535-0002 | EtherCAT Terminal, 2-channel pulse width current terminal 24 V DC, 2 A |
| EL2535-0050 | EtherCAT Terminal, 2-channel pulse width current terminal 24 V DC, 50 mA |
| EL2545 | ES2545 | EtherCAT Terminal, 2-channel pulse width current terminal 50 V DC, 3.5 A |
| EL2595 | EtherCAT Terminal, 1-channel LED constant current terminal, 48 V DC, 700 mA, adjustable |
| EL2602 | ES2602 | EtherCAT Terminal, 2-channel relay output 230 V AC, 5 A, make contact |
| EL2612 | ES2612 | EtherCAT Terminal, 2-channel relay output 125 V AC, 2 A, potential-free change-over, no power contacts |
| EL2622 | ES2622 | EtherCAT Terminal, 2-channel relay output 230 V AC, 5 A, potential-free make contact, no power contacts |
| EL2624 | ES2624 | EtherCAT Terminal, 4-channel relay output 125 V AC/30 V DC, 2 A |
| EL2652 | ES2652 | EtherCAT Terminal, 2 relay outputs, 230 V AC/300 V DC, 1 A, isolated change-over |
| EL2712 | ES2712 | EtherCAT Terminal, 2-channel triac output 12…230 V AC, 0.5 A |
| EL2722 | ES2722 | EtherCAT Terminal, 2-channel triac output 12…230 V AC, 1 A with mutually locked outputs |
| EL2732 | ES2732 | EtherCAT Terminal, 2-channel triac output 12…230 V AC, 0.5 A, no power contacts |
| EL2784 | EtherCAT Terminal, 4 digital outputs 48 V DC (ohmic), 30 V AC/DC (inductive), 2 A, solid state |
| EL2788 | EtherCAT Terminal, 8 digital outputs 48 V DC (ohmic), 30 V AC/DC (inductive), 2 A, solid state |
| EL2794 | EtherCAT Terminal, 4 digital outputs 48 V DC (ohmic), 30 V AC/DC (inductive), 2 A, solid state, potential-free |
| EL2798 | EtherCAT Terminal, 8 digital outputs 48 V DC (ohmic), 30 V AC/DC (inductive), 2 A, solid state |
| EL2808 | EtherCAT Terminal, 8-channel digital output 24 V DC, 8 x 0 V DC, 0.5 A |
| EL2809 | EtherCAT Terminal, 16-channel digital output 24 V DC, 0.5 A |
| EL2819 | EtherCAT Terminal, 16-channel digital output 24 V DC, 0.5 A, with diagnostics |
| EL2828 | EtherCAT Terminal, 8-channel digital output 24 V DC, 2 A, total current 10 A |
| EL2872 | EtherCAT Terminal, 16-channel digital output 24 V DC, 0.5 A, flat-ribbon cable connection |
| EL2889 | EtherCAT Terminal, 16-channel digital output 24 V DC, 0.5 A, 0 V (ground) switching |
| EL2901 | EtherCAT Terminal, potential supply, TwinSAFE, 24 V DC, 10 A |
| EL2902 | EtherCAT Terminal, 2 fail-safe outputs, TwinSAFE, 24 V DC, 2.3 A |
| EL2904 | EtherCAT Terminal, 4 fail-safe outputs, TwinSAFE, 24 V DC, 0.5 A |
| EL3001 | ES3001 | EtherCAT Terminal, 1-channel analog input -10…+10 V, single-ended, 12 bit |
| EL3002 | ES3002 | EtherCAT Terminal, 2-channel analog input -10…+10 V, single-ended, 12 bit |
| EL3004 | ES3004 | EtherCAT Terminal, 4-channel analog input -10…+10 V, single-ended, 12 bit |
| EL3008 | ES3008 | EtherCAT Terminal, 8-channel analog input -10…+10 V, single-ended, 12 bit |
| EL3011 | ES3011 | EtherCAT Terminal, 1-channel analog input 0…20 mA, differential input, 12 bit |
| EL3012 | ES3012 | EtherCAT Terminal, 2-channel analog input 0…20 mA, differential input, 12 bit |
| EL3014 | ES3014 | EtherCAT Terminal, 4-channel analog input 0…20 mA, differential input, 12 bit |
| EL3021 | ES3021 | EtherCAT Terminal, 1-channel analog input 4…20 mA, differential input, 12 bit |
| EL3022 | ES3022 | EtherCAT Terminal, 2-channel analog input 4…20 mA, differential input, 12 bit |
| EL3024 | ES3024 | EtherCAT Terminal, 4-channel analog input 4…20 mA, differential input, 12 bit |
| EL3041 | ES3041 | EtherCAT Terminal, 1-channel analog supply terminal 0…20 mA with power supply for transducers, single-ended, 12 bit |
| EL3042 | ES3042 | EtherCAT Terminal, 2-channel analog supply terminal 0…20 mA with power supply for transducers, single-ended, 12 bit |
| EL3044 | ES3044 | EtherCAT Terminal, 4-channel analog input 0…20 mA, single-ended, 12 bit |
| EL3048 | ES3048 | EtherCAT Terminal, 8-channel analog input 0…20 mA, single-ended, 12 bit |
| EL3051 | ES3051 | EtherCAT Terminal, 1-channel analog supply terminal 4…20 mA with power supply for transducers, single-ended, 12 bit |
| EL3052 | ES3052 | EtherCAT Terminal, 2-channel analog supply terminal 4…20 mA with power supply for transducers, single-ended, 12 bit |
| EL3054 | ES3054 | EtherCAT Terminal, 4-channel analog input 4…20 mA, single-ended, 12 bit |
| EL3058 | ES3058 | EtherCAT Terminal, 8-channel analog input 4…20 mA, single-ended, 12 bit |
| EL3061 | ES3061 | EtherCAT Terminal, 1-channel analog input 0…10 V, single-ended, 12 bit |
| EL3062 | ES3062 | EtherCAT Terminal, 2-channel analog input 0…10 V, single-ended, 12 bit |
| EL3064 | ES3064 | EtherCAT Terminal, 4-channel analog input 0…10 V, single-ended, 12 bit |
| EL3068 | ES3068 | EtherCAT Terminal, 8-channel analog input 0…10 V, single-ended, 12 bit |
| EL3101 | ES3101 | EtherCAT Terminal, 1-channel analog input -10…+10 V, differential input, 16 bit |
| EL3102 | ES3102 | EtherCAT Terminal, 2-channel analog input -10…+10 V, differential input, 16 bit |
| EL3104 | ES3104 | EtherCAT Terminal, 4-channel analog input -10…+10 V, differential input, 16 bit |
| EL3111 | ES3111 | EtherCAT Terminal, 1-channel analog input 0…20 mA, differential input, 16 bit |
| EL3112 | ES3112 | EtherCAT Terminal, 2-channel analog input 0…20 mA, differential input, 16 bit |
| EL3114 | ES3114 | EtherCAT Terminal, 4-channel analog input 0…20 mA, differential input, 16 bit |
| EL3121 | ES3121 | EtherCAT Terminal, 1-channel analog input 4…20 mA, differential input, 16 bit |
| EL3122 | ES3122 | EtherCAT Terminal, 2-channel analog input 4…20 mA, differential input, 16 bit |
| EL3124 | ES3124 | EtherCAT Terminal, 4-channel analog input 4…20 mA, differential input, 16 bit |
| EL3124-0090 | EtherCAT Terminal, 4-channel analog input 4…20 mA, differential input, 16 bit, TwinSAFE SC |
| EL3141 | ES3141 | EtherCAT Terminal, 1-channel analog supply terminal 0…20 mA with power supply for transducers via power contacts, single-ended, 16 bit |
| EL3142 | ES3142 | EtherCAT Terminal, 2-channel analog input 0…20 mA, single-ended, 16 bit |
| EL3144 | ES3144 | EtherCAT Terminal, 4-channel analog input 0…20 mA, single-ended, 16 bit |
| EL3151 | ES3151 | EtherCAT Terminal, 1-channel analog input 4…20 mA, single-ended, 16 Bit |
| EL3152 | ES3152 | EtherCAT Terminal, 2-channel analog input 4…20 mA, single-ended, 16 bit |
| EL3154 | ES3154 | EtherCAT Terminal, 4-channel analog input 4…20 mA, single-ended, 16 bit |
| EL3161 | ES3161 | EtherCAT Terminal, 1-channel analog input 0…10 V, single-ended, 16 bit |
| EL3162 | ES3162 | EtherCAT Terminal, 2-channel analog input 0…10 V, single-ended, 16 bit |
| EL3164 | ES3164 | EtherCAT Terminal, 4-channel analog input 0…10 V, single-ended, 16 bit |
| EL3201 | ES3201 | EtherCAT Terminal, 1-channel input PT100 (RTD) for resistance sensors, 16 bit |
| EL3202 | ES3202 | EtherCAT Terminal, 2-channel input PT100 (RTD) for resistance sensors, 16 bit |
| EL3204 | ES3204 | EtherCAT Terminal, 4-channel input PT100 (RTD) for resistance sensors, 16 bit |
| EL3204-0200 | EtherCAT Terminal, 4-channel universal input terminal for RTD up to 240 kΩ, NTC 20 k, 16 bit |
| EL3208 | EtherCAT Terminal, 8-channel input PT100 (RTD) for resistance sensors, 16 bit |
| EL3214 | EtherCAT Terminal, 4-channel input PT100 (RTD) for resistance sensors, 16 bit |
| EL3255 | EtherCAT Terminal, 5-channel input, potentiometer measurement with sensor supply |
| EL3311 | EtherCAT Terminal, 1-channel thermocouple input, 16 bit |
| EL3312 | EtherCAT Terminal, 2-channel thermocouple input, 16 bit |
| EL3314 | EtherCAT Terminal, 4-channel thermocouple input, 16 bit |
| EL3318 | EtherCAT Terminal, 8-channel thermocouple input, 16 bit |
| EL3351 | ES3351 | EtherCAT Terminal, 1 analog input, resistance bridge (strain gauge), 16 bit |
| EL3356 | ES3356 | EtherCAT Terminal, 1-channel accurate resistance bridge evaluation, 16 bit |
| EL3356-0010 | EtherCAT Terminal, 1-channel precise load cell analysis (resistor bridge), 24 bit |
| EL3403 | ES3403 | EtherCAT Terminal, 3-phase power measurement terminal, 16 bit |
| EL3413 | EtherCAT Terminal, 3-phase power measurement terminal, max. 690 V AC 3~ |
| EL3413-0001 | EtherCAT Terminal, 3-phase power measurement terminal, max. 690 V AC 3~, UL-approval |
| EL3433 | EtherCAT Terminal, 3-phase power measurement terminal, max. 500 V AC, 10 A |
| EL3602 | ES3602 | EtherCAT Terminal, 2-channel analog input -10…+10 V, differential input, 24 bit |
| EL3612 | ES3612 | EtherCAT Terminal, 2-channel analog input 0…20 mA, differential input, 24 bit |
| EL3632 | EtherCAT Terminal, 2-channel analog input for Condition Monitoring (IEPE) |
| EL3681 | ES3681 | EtherCAT Terminal, digital multimeter terminal |
| EL3692 | EtherCAT Terminal, 2-channel resistance measurement terminal 10 mΩ…10 MΩ, high-precision |
| EL3702 | ES3702 | EtherCAT Terminal, 2-channel analog input -10…+10 V, differential inputs, 16 bit, oversampling |
| EL3742 | ES3742 | EtherCAT Terminal, 2-channel analog input 0…20 mA, differential inputs, 16 bit, oversampling |
| EL3773 | EtherCAT Terminal, 3-phase power monitoring oversampling terminal, 16 bit |
| EL4001 | ES4001 | EtherCAT Terminal, 1-channel analog output 0…10 V, 12 bit |
| EL4002 | ES4002 | EtherCAT Terminal, 2-channel analog output 0…10 V, 12 bit |
| EL4004 | ES4004 | EtherCAT Terminal, 4-channel analog output 0…10 V, 12 bit |
| EL4008 | ES4008 | EtherCAT Terminal, 8-channel analog output 0…10 V, 12 bit |
| EL4011 | ES4011 | EtherCAT Terminal, 1-channel analog output 0…20 mA, 12 bit |
| EL4012 | ES4012 | EtherCAT Terminal, 2-channel analog output 0…20 mA, 12 bit |
| EL4014 | ES4014 | EtherCAT Terminal, 4-channel analog output 0…20 mA, 12 bit |
| EL4018 | ES4018 | EtherCAT Terminal, 8-channel analog output 0…20 mA, 12 bit |
| EL4021 | ES4021 | EtherCAT Terminal, 1-channel analog output 4…20 mA, 12 bit |
| EL4022 | ES4022 | EtherCAT Terminal, 2-channel analog output 4…20 mA, 12 bit |
| EL4024 | ES4024 | EtherCAT Terminal, 4-channel analog output 4…20 mA, 12 bit |
| EL4028 | ES4028 | EtherCAT Terminal, 8-channel analog output 4…20 mA, 12 bit |
| EL4031 | ES4031 | EtherCAT Terminal, 1-channel analog output -10…+10 V, 12 bit |
| EL4032 | ES4032 | EtherCAT Terminal, 2-channel analog output -10…+10 V, 12 bit |
| EL4034 | ES4034 | EtherCAT Terminal, 4-channel analog output -10…+10 V, 12 bit |
| EL4038 | ES4038 | EtherCAT Terminal, 8-channel analog output -10…+10 V, 12 bit |
| EL4102 | ES4102 | EtherCAT Terminal, 2-channel analog output 0…10 V, 16 bit |
| EL4104 | ES4104 | EtherCAT Terminal, 4-channel analog output 0…10 V, 16 bit |
| EL4112 | ES4112 | EtherCAT Terminal, 2-channel analog output 0…20 mA, 16 bit |
| EL4114 | ES4114 | EtherCAT Terminal, 4-channel analog output 0…20 mA, 16 bit |
| EL4122 | ES4122 | EtherCAT Terminal, 2-channel analog output 4…20 mA, 16 bit |
| EL4124 | ES4124 | EtherCAT Terminal, 4-channel analog output 4…20 mA, 16 bit |
| EL4132 | ES4132 | EtherCAT Terminal, 2-channel analog output -10…+10 V, 16 bit |
| EL4134 | ES4134 | EtherCAT Terminal, 4-channel analog output -10…+10 V, 16 bit |
| EL4712 | ES4712 | EtherCAT Terminal, 2-channel analog output 0…20 mA, 16 bit, with oversampling |
| EL4732 | ES4732 | EtherCAT Terminal, 2-channel analog output -10…+10 V, with oversampling |
| EL5001 | ES5001 | EtherCAT Terminal, SSI encoder interface |
| EL5002 | ES5002 | EtherCAT Terminal, SSI encoder interface |
| EL5021 | ES5021 | EtherCAT Terminal, 1-channel SinCos encoder interface, 1 VPP |
| EL5032 | EtherCAT Terminal, 2-channel EnDAT 2.2 interface terminal |
| EL5101 | ES5101 | EtherCAT Terminal, incremental encoder interface with differential inputs, 16 bit |
| EL5151 | ES5151 | EtherCAT Terminal, 1-channel incremental encoder interface, 32 bit |
| EL5151-0021 | EtherCAT Terminal, incremental encoder interface with parameterisable 24 V DC output, 32 bit |
| EL5152 | ES5152 | EtherCAT Terminal, 2-channel incremental encoder interface, 32 bit |
| EL6001 | ES6001 | EtherCAT Terminal, serial interface RS232 |
| EL6002 | EtherCAT Terminal, 2-channel serial interface RS232 |
| EL6021 | ES6021 | EtherCAT Terminal, serial interface RS422/RS485 |
| EL6022 | EtherCAT Terminal, 2-channel serial interface RS422/RS485 |
| EL6070 | EtherCAT Terminal, License key terminal for TwinCAT 3.1 |
| EL6080 | EtherCAT Terminal, memory terminal, 128 kbyte |
| EL6090 | EtherCAT Terminal, Display terminal with navigation switch and operating hours counter |
| EL6201 | ES6201 | EtherCAT Terminal, AS-Interface master terminal |
| EL6224 | EtherCAT Terminal, IO-Link terminal |
| EL6601 | EtherCAT Terminal, 1-port Ethernet switch port terminal |
| EL6614 | EtherCAT Terminal, 4-port Ethernet switch port terminal |
| EL6631 | EtherCAT Terminal, PROFINET RT controller/device terminal |
| EL6632 | EtherCAT Terminal, PROFINET IRT controller |
| EL6652 | EtherCAT Terminal, EtherNet/IP master terminal |
| EL6688 | EtherCAT Terminal, IEEE 1588 external synchronisation interface |
| EL6692 | EtherCAT Terminal, EtherCAT bridge terminal |
| EL6695 | EtherCAT Terminal, EtherCAT bridge terminal |
| EL6720 | EtherCAT Terminal, Lightbus master terminal |
| EL6731 | EtherCAT Terminal, PROFIBUS master terminal |
| EL6731-0010 | EtherCAT Terminal, PROFIBUS slave terminal |
| EL6740-0010 | EtherCAT Terminal, Interbus slave terminal |
| EL6751 | EtherCAT Terminal, CANopen master terminal |
| EL6751-0010 | EtherCAT Terminal, CANopen slave terminal |
| EL6752 | EtherCAT Terminal, DeviceNet master terminal |
| EL6752-0010 | EtherCAT Terminal, DeviceNet slave terminal |
| EL6851 | EtherCAT Terminal, DMX master |
| EL6851-0010 | EtherCAT Terminal, DMX slave |
| EL6900 | EtherCAT Terminal, TwinSAFE Logic |
| EL6910 | EtherCAT Terminal, TwinSAFE Logic |
| EL6930 | EtherCAT Terminal, TwinSAFE/PROFIsafe logic and gateway terminal |
| EL7031 | ES7031 | EtherCAT Terminal, stepper motor terminal 24 V DC, 1.5 A, 2 phases, 2 digital inputs 24 V DC |
| EL7037 | EtherCAT Terminal, stepper motor terminal with incremental encoder, 24 V DC, 1.5 A, vector control |
| EL7041 | ES7041 | EtherCAT Terminal, stepper motor terminal with incremental encoder, 50 V DC, 5 A |
| EL7047 | EtherCAT Terminal, stepper motor terminal with incremental encoder, 50 V DC, 5 A, vector control |
| EL7201 | EtherCAT Terminal, Servomotor terminal, 50 V DC, 2,8 ARMS |
| EL7201-0010 | EtherCAT Terminal, Servomotor terminal with OCT, 50 V DC, 2.8 ARMS |
| EL7211 | EtherCAT Terminal, Servomotor terminal, 50 V DC, 4.5 ARMS |
| EL7211-0010 | EtherCAT Terminal, Servomotor terminal with OCT, 50 V DC, 4.5 ARMS |
| EL7332 | ES7332 | EtherCAT Terminal, 2-channel DC motor output stage 24 V DC, 1 A |
| EL7342 | ES7342 | EtherCAT Terminal, 2-channel DC motor output stage 50 V DC, 3.5 A |
| EL9011 | EtherCAT Terminal, bus end cap |
| EL9070 | EtherCAT Terminal, shield terminal, 8 x shield |
| EL9080 | EtherCAT Terminal, isolation terminal |
| EL9100 | ES9100 | EtherCAT Terminal, passive potential feed terminal, 24 V DC |
| EL9110 | ES9110 | EtherCAT Terminal, power supply terminal with diagnostics, 24 V DC |
| EL9150 | ES9150 | EtherCAT Terminal, power supply terminal, 230 V AC |
| EL9160 | ES9160 | EtherCAT Terminal, power supply terminal with diagnostics, 230 V AC |
| EL9180 | ES9180 | EtherCAT Terminal, potential distribution terminal with 2 clamps per power contact |
| EL9181 | EtherCAT Terminal, potential distribution terminal, 2 x 8 terminal points |
| EL9182 | EtherCAT Terminal, potential distribution terminal, 8 x 2 terminal points |
| EL9183 | EtherCAT Terminal, potential distribution terminal, 1 x 16 terminal points |
| EL9184 | EtherCAT Terminal, potential distribution terminal, 8 x 24 V contact, 8 x 0 V contact |
| EL9185 | ES9185 | EtherCAT Terminal, potential distribution terminal with 4 clamps per power contact |
| EL9186 | ES9186 | EtherCAT Terminal, potential distribution terminal, 8 x 24 V contact |
| EL9187 | ES9187 | EtherCAT Terminal, potential distribution terminal, 8 x 0 V contact |
| EL9188 | EtherCAT Terminal, potential distribution terminal, 16 x 24 V contact |
| EL9189 | EtherCAT Terminal, potential distribution terminal, 16 x 0 V contact |
| EL9190 | ES9190 | EtherCAT Terminal, power supply terminal for any voltage up to 230 V |
| EL9195 | ES9195 | EtherCAT Terminal, shield terminal |
| EL9200 | EtherCAT Terminal, power supply terminal with fuse, 24 V DC |
| EL9210 | EtherCAT Terminal, power supply terminal with fuse and diagnostics, 24 V DC |
| EL9250 | EtherCAT Terminal, power supply terminal with fuse, 230 V AC |
| EL9260 | EtherCAT Terminal, power supply terminal with fuse and diagnostics, 230 V AC |
| EL9290 | EtherCAT Terminal, power supply terminal, up to 400 V AC |
| EL9400 | ES9400 | EtherCAT Terminal, power supply terminal for E-bus, 24 V DC, 2 A |
| EL9410 | ES9410 | EtherCAT Terminal, power supply terminal for E-bus with diagnostics |
| EL9505 | ES9505 | EtherCAT Terminal, power supply unit terminal 24 V DC, output 5 V DC, 0.5 A |
| EL9508 | ES9508 | EtherCAT Terminal, power supply unit terminal 24 V DC, output 8 V DC, 0.5 A |
| EL9510 | ES9510 | EtherCAT Terminal, power supply unit terminal 24 V DC, output 10 V DC, 0.5 A |
| EL9512 | ES9512 | EtherCAT Terminal, power supply unit terminal 24 V DC, output 12 V DC, 0.5 A |
| EL9515 | ES9515 | EtherCAT Terminal, power supply unit terminal 24 V DC, output 15 V DC, 0.5 A |
| EL9520 | ES9520 | EtherCAT Terminal, AS-Interface potential feed terminal with filter |
| EL9540 | ES9540 | EtherCAT Terminal, surge filter field supply |
| EL9550 | ES9550 | EtherCAT Terminal, surge filter system and field supply |
| EL9560 | ES9560 | EtherCAT Terminal, power supply terminal 24 V DC, output 24 V DC, 0.1 A |
| EL9570 | ES9570 | EtherCAT Terminal, buffer capacitor terminal |
| EL9571 | ES9571 | EtherCAT Terminal, buffer capacitor terminal |
| EL9576 | ES9576 | EtherCAT Terminal, brake chopper terminal |
| EL9820 | EtherCAT evaluation kit |
| ELxxxx | EtherCAT Terminals |
| EM2042 | Terminal module, 16-channel digital output 24 V, 0.5 A, D-sub connection |
| EM3701 | EtherCAT Terminal, terminal module, 1-channel differential pressure measuring terminal -100…+100 hPa (-100…+100 mbar) |
| EM3702 | EtherCAT Terminal, terminal module, 2-channel absolute pressure measuring terminal 7,500 hPa (7.5 bar) |
| EM7004 | EtherCAT module, 4-axis interface |
| Embedded PC | DIN rail PC CX8000, CX9000, CX9010, CX9020, CX5010, CX5020, CX5120, CX5130, CX5140, CX1000, CX1010, CX1020, CX1030, CX2020, CX2030, CX2040 |
| Encoder option cards | Encoder option cards for AX5000 |
| EP1008 | EtherCAT Box, 8 digital inputs 24 V DC, filter 3.0 ms, M8 screw type |
| EP1008-0022 | EtherCAT Box, 8 digital inputs 24 V DC, filter 3.0 ms |
| EP1018 | EtherCAT Box, 8 digital inputs 24 V DC, filter 10 μs, M8 screw type |
| EP1098 | EtherCAT Box, 8 digital inputs 24 V DC, filter 10 µs, negative switching |
| EP1111 | EtherCAT Box with ID switch |
| EP1122 | EtherCAT Box, EtherCAT junction, 2-port |
| EP1809 | EtherCAT Box, 16 digital inputs 24 V DC, filter 3.0 ms |
| EP1816 | EtherCAT Box, 16 digital inputs 24 V DC, filter 10 μs |
| EP1816-3008 | EtherCAT Box, 16 digital inputs 24 V DC, 2 x 3-axis accelerometers |
| EP1819 | EtherCAT Box, 16 digital inputs 24 V DC, filter 10 µs |
| EP1908 | EtherCAT Box, 8 digital inputs, TwinSAFE, 24 V DC |
| EP2008-0022 | EtherCAT Box, 8 digital outputs 24 V DC, 0.5 A |
| EP2028 | EtherCAT Box, 8 digital outputs 24 V DC, 2 A (IS = 4 A) |
| EP2028-0032 | EtherCAT Box, 8 digital outputs 24 V DC, 2.8 A |
| EP2038 | EtherCAT Box, 8 digital outputs 24 V DC, 2 A (IS = 4 A), with diagnostics |
| EP2308 | EtherCAT Box, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, 0.5 A |
| EP2316 | EtherCAT Box, 8 digital inputs 24 V DC, 10 µs, 8 digital outputs 24 V DC, 0.5 A |
| EP2316-0003 | EtherCAT Box, 8 digital inputs 24 V DC, 10 µs, 8 digital outputs 24 V DC, 0.5 A (connector with spring-loaded system) |
| EP2318 | EtherCAT Box, 4 digital inputs 24 V DC, 10 µs, 4 digital outputs 24 V DC, 0.5 A |
| EP2328 | EtherCAT Box, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, 2.0 A |
| EP2338 | EtherCAT Box, 8 digital inputs or outputs, freely configurable |
| EP2339 | EtherCAT Box, 16 digital inputs or outputs, freely configurable |
| EP2349 | EtherCAT Box, 16 digital inputs or outputs, freely configurable, filter 10 µs |
| EP2624 | EtherCAT Box, 4-channel relay output 25 V AC/30 V DC |
| EP2809 | EtherCAT Box, 16 digital outputs 24 V DC, 0.5 A |
| EP2816 | EtherCAT Box, 16 digital outputs 24 V DC, 0.5 A, D-sub connection |
| EP2817 | EtherCAT Box, 24 digital outputs 24 V DC, 0.1 A, D-sub connection |
| EP3162 | EtherCAT Box, 2 single-ended analog inputs -10…+10 V or 0/4…20 mA, parameterisable, galvanic isolation, 16 bit |
| EP3174 | EtherCAT Box, 4 differential analog inputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| EP3184 | EtherCAT Box, 4 analog inputs -10…+10 V or 0/4…20 mA, single-ended, parameterisable, 16 bit |
| EP3356-0022 | EtherCAT Box, 1-channel accurate resistance bridge evaluation, 24 bit |
| EP3744 | EtherCAT Box, differential pressure measuring, 6 digital inputs 24 V DC, 2 digital outputs 24 V DC, 0.5 A, 4 pressure inputs -1…1 bar |
| EP3744-1041 | EtherCAT Box, absolute or differential pressure measuring, 6 digital inputs 24 V DC, 2 digital outputs 24 V DC, 0.5 A, 4 pressure inputs 0…7 bar |
| EP4174 | EtherCAT Box, 4 analog outputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| EP4374 | EtherCAT Box, 2 analog inputs and 2 analog outputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| EP5101 | EtherCAT Box, incremental encoder interface with differential inputs, 16 bits |
| EP5101-1002 | EtherCAT Box, incremental encoder interface, differential input, 24 V DC sensor supply, 16 bits |
| EP5151-0002 | EtherCAT Box, incremental encoder interface with 24 V DC inputs, 16 bits |
| EP6002 | EtherCAT Box, 1 serial interface RS232, RS422/RS485 |
| EP6002 | EtherCAT Box, 2 serial interfaces RS232, RS422/RS485 |
| EP6224 | EtherCAT Box, IO-Link master |
| EP7041-0002 | EtherCAT Box, Stepper Motor module 50 V DC, 5 A, with incremental encoder, 2 digital inputs, 1 digital output |
| EP7041-1002 | EtherCAT Box, Stepper Motor module 50 V DC, 1.5 A, with incremental encoder, 2 digital inputs, 1 digital output |
| EP7041-2002 | EtherCAT Box, Stepper Motor module 50 V DC, 5 A, with incremental encoder, 2 digital inputs, 1 digital output |
| EP7041-3002 | EtherCAT Box, Stepper Motor module 50 V DC, 5 A, with incremental encoder, 2 digital inputs, 1 digital output, for high-speed applications |
| EP7342 | EtherCAT Box, 2-channel DC motor output stage 50 V DC, 3.5 A |
| EP8309 | EtherCAT Box, multi-functional I/O box |
| EP9128 | EtherCAT Box, EtherCAT junction IP 67, 8-channel |
| EP9214 | EtherCAT Box, 4/4-channel power distribution for EtherCAT Box modules |
| EP9224 | EtherCAT Box, 4/4-channel power distribution for EtherCAT Box modules with current measurement/data logging |
| EP9300 | PROFINET RT EtherCAT Box |
| EP9521-0020 | EtherCAT Box, EtherCAT media converter fibre-optic (multimode), 1-channel |
| EPI1008 | IO-Link box, 8 digital inputs 24 V DC, filter 3.0 ms |
| EPI1809 | IO-Link box, 16 digital inputs 24 V DC, filter 3.0 ms |
| EPI2008 | IO-Link box, 8 digital outputs 24 V DC, 0.5 A |
| EPI2338 | IO-Link box, 8 digital inputs or outputs, freely configurable |
| EPI2339 | IO-Link box, 16 digital inputs or outputs, freely configurable |
| EPI2809 | IO-Link box, 16 digital outputs 24 V DC, 0.5 A |
| EPI3174 | IO-Link box, 4 differential analog inputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| EPI4374 | IO-Link box, 2 analog inputs and 2 analog outputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| EQ1008 | stainless steel EtherCAT Box, 8 digital inputs 24 V DC, filter 3.0 ms |
| EQ1809 | stainless steel EtherCAT Box, 16 digital inputs 24 V DC, filter 3.0 ms |
| EQ2008 | stainless steel EtherCAT Box, 8 digital outputs 24 V DC, 0.5 A |
| EQ2339 | stainless steel EtherCAT Box, 16 digital inputs or outputs, freely configurable |
| EQ2809 | stainless steel EtherCAT Box, 16 digital outputs 24 V DC, 0.5 A |
| EQ3174 | stainless steel EtherCAT Box, 4 differential analog inputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| EQ3204 | stainless steel EtherCAT Box, 4 analog RTD inputs for resistance thermometer (PT100), 16 bit |
| EQ3314 | stainless steel EtherCAT Box, 4 analog TC inputs for thermocouples, 16 bit |
| ER1008 | EtherCAT Box, zinc die-cast housing, 8 digital inputs 24 V DC, filter 3.0 ms |
| ER1008-0022 | EtherCAT Box, zinc die-cast housing, 8 digital inputs 24 V DC, filter 3.0 ms |
| ER1018 | EtherCAT Box, zinc die-cast housing, 8 digital inputs 24 V DC, filter 10 µs |
| ER1098 | EtherCAT Box, zinc die-cast housing, 8 digital inputs 24 V DC, filter 10 µs, negative switching |
| ER1258 | EtherCAT Box, zinc die-cast housing, 8 digital inputs with 2-channel time stamp |
| ER1518 | EtherCAT Box, zinc die-cast housing, 2 up/down couters 24 V DC, 32 bit, 1 kHz, 8 digital inputs 24 V DC, adjustable filters 0…100 ms |
| ER1809 | EtherCAT Box, zinc die-cast housing, 16 digital inputs 24 V DC, filter 3.0 ms |
| ER1819 | EtherCAT Box, zinc die-cast housing, 16 digital inputs 24 V DC, filter 10 µs |
| ER2008 | EtherCAT Box, zinc die-cast housing, 8 digital outputs 24 V DC, 0.5 A |
| ER2008-0022 | EtherCAT Box, zinc die-cast housing, 8 digital outputs 24 V DC, 0.5 A |
| ER2028 | EtherCAT Box, zinc die-cast housing, 8 digital outputs 24 V DC, 2 A (IS = 4 A) |
| ER2028-1032 | EtherCAT Box, zinc die-cast housing, 8 digital outputs 24 V DC, 2.8 A |
| ER2038 | EtherCAT Box, zinc die-cast housing, 8 digital outputs 24 V DC, 2 A (IS = 4 A), with diagnostics |
| ER2308 | EtherCAT Box, zinc die-cast housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, 0.5 A |
| ER2318 | EtherCAT Box, 4 digital inputs 24 V DC, 10 µs, 4 digital outputs 24 V DC, 0.5 A |
| ER2328 | EtherCAT Box, zinc die-cast housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, 2.0 A |
| ER2338 | EtherCAT Box, zinc die-cast housing, 8 digital inputs or outputs, freely configurable |
| ER2339 | EtherCAT Box, zinc die-cast housing, 16 digital inputs or outputs, freely configurable |
| ER2349 | EtherCAT Box, zinc die-cast housing, 16 digital inputs or outputs, freely configurable, filter 10 µs |
| ER2624 | EtherCAT Box, zinc die-cast housing, 4-channel relay output 25 V AC/30 V DC |
| ER2809 | EtherCAT Box, zinc die-cast housing, 16 digital outputs 24 V DC, 0.5 A |
| ER3174 | EtherCAT Box, zinc die-cast housing, 4 differential analog inputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| ER3184 | EtherCAT Box, zinc die-cast housing, 4 analog inputs -10…+10 V or 0/4…20 mA, single-ended, parameterisable, 16 bit |
| ER3204 | EtherCAT Box, zinc die-cast housing, 4 analog RTD inputs for resistance thermometer (PT100), 16 bit |
| ER3314 | EtherCAT Box, zinc die-cast housing, 4 analog TC inputs for thermocouples, 16 bit |
| ER4174 | EtherCAT Box, zinc die-cast housing, 4 analog outputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| ER4374 | EtherCAT Box, zinc die-cast housing, 2 analog inputs and 2 analog outputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| ER5101 | EtherCAT Box, zinc die-cast housing, incremental encoder interface with differential inputs, 16 bits |
| ER5151-0002 | EtherCAT Box, zinc die-cast housing, incremental encoder interface with 24 V DC inputs, 16 bits |
| ER6002 | EtherCAT Box, zinc die-cast housing, 2 serial interfaces RS232, RS422/RS485 |
| ER6002 | EtherCAT Box, zinc die-cast housing, 1 serial interface RS232, RS422/RS485 |
| ER7041 | EtherCAT Box, zinc die-cast housing, Stepper Motor module 50 V DC, 5 A, with incremental encoder, 2 digital inputs, 1 digital output |
| ER7041-1002 | EtherCAT Box, zinc die-cast housing, Stepper Motor module 50 V DC, 1.5 A, with incremental encoder, 2 digital inputs, 1 digital output |
| ER7041-2002 | EtherCAT Box, zinc die-cast housing, Stepper Motor module 50 V DC, 5 A, with incremental encoder, 2 digital inputs, 1 digital output |
| ER7041-3002 | EtherCAT Box, zinc die-cast housing, Stepper Motor module 50 V DC, 5 A, with incremental encoder, 2 digital inputs, 1 digital output, for high-speed applications |
| ER7342 | EtherCAT Box, zinc die-cast housing, 2-channel DC motor output stage 50 V DC, 3.5 A |
| ER8309 | EtherCAT Box, zinc die-cast housing, multi-functional I/O box |
| ERI1008 | IO-Link box, zinc die-cast housing, 8 digital inputs 24 V DC, filter 3.0 ms |
| ERI1809 | IO-Link box, zinc die-cast housing, 16 digital inputs 24 V DC, filter 3.0 ms |
| ERI2008 | IO-Link box, zinc die-cast housing, 8 digital outputs 24 V DC, 0.5 A |
| ERI2338 | IO-Link box, zinc die-cast housing, 8 digital inputs or outputs, freely configurable |
| ERI2339 | IO-Link box, zinc die-cast housing, 16 digital inputs or outputs, freely configurable |
| ERI2809 | IO-Link box, zinc die-cast housing, 16 digital outputs 24 V DC, 0.5 A |
| ERI3174 | IO-Link box, zinc die-cast housing, 4 differential analog inputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| ERI4374 | IO-Link box, zinc die-cast housing, 2 analog inputs and 2 analog outputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit |
| ESxxxx | EtherCAT Terminals with pluggable wiring |
| ET1100 | EtherCAT ASIC, BGA128, 10 x 10 mm |
| ET1200 | EtherCAT ASIC, QFN48, 7 x 7 mm |
| ET1810 | EtherCAT IP core, node-locked license for Altera® FPGAs |
| ET1811 | EtherCAT IP core, one-time kick-off charge for the node-locked license for selected Altera® devices |
| ET1812 | Floating buy out license for Altera FPGAs |
| ET1815 | EtherCAT IP core, node-locked license for Xilinx® FPGAs |
| ET1816 | EtherCAT IP core, one-time kick-off charge for the node-locked license for selected Xilinx® devices |
| ET2000 | Industrial Ethernet multi-channel probe |
| ET9000 | License for using the EtherCAT configurator |
| ET9200 | License for using the EtherCAT Master Sample Code |
| ET9300 | License for using the EtherCAT Slave Stack Code |
| ET9400 | EtherCAT conformance test tool |
| ET Bus Terminals | Fieldbus-independent electronic series terminals with extended temperature range (-25…+60 °C) |
| EtherCAT | Real-time Ethernet fieldbus |
| EtherCAT Box | IP 67 modules with direct EtherCAT interface |
| EtherCAT Bus Coupler K-bus | Bus Coupler for EtherCAT system, BK1120, BK1250 |
| EtherCAT Coupler E-bus | Couplers for EtherCAT system, EKxxxx |
| EtherCAT Drives | Digital Compact Servo Drive for EtherCAT sytem, AX5000 |
| EtherCAT Fieldbus Box | Fieldbus Box for EtherCAT system, IL230x-B110 |
| EtherCAT Fieldbus Module | Multi-thermocouple module with EtherCAT interface, FM3300-B110 |
| EtherCAT Terminals | EtherCAT Terminals for EtherCAT system, ELxxxx, ESxxxx |
| EtherNet/IP Bus Coupler E-bus | EtherNet/IP Bus Coupler for EtherCAT Terminals, EK9500 |
| EtherNet/IP Bus Coupler K-bus | Bus Coupler for EtherNet/IP system, BK9105 |
| Ethernet Bus Coupler E-bus | Ethernet Bus Coupler for EtherCAT Terminals, EK9000 |
| Ethernet Bus Coupler K-bus | Bus Coupler for Ethernet TCP/IP system, BK9xx0, BC9xx0, BX9000 |
| Ethernet Fieldbus Box | Fieldbus Box for Ethernet TCP/IP system, IL230x-B900, IL230x-C900 |
| Ethernet PC cards | PC Fieldbus Cards with PCI bus for Ethernet, FC9001-0010, FC9011, FC9002, FC9004, FC9051, FC9151 |
| Ethernet Switches | Ethernet Switches |
| F | |
| FB1111-014x | EtherCAT piggyback controller boards with ET1100 |
| FC1100 | PC Fieldbus Cards, PCI EtherCAT slave card |
| FC1121 | PC Fieldbus Cards, PCI Express EtherCAT slave card |
| FC2001 | PC Fieldbus Cards, PCI Lightbus, 1-channel |
| FC2002 | PC Fieldbus Cards, PCI Lightbus, 2-channel |
| FC3101 | PC Fieldbus Cards, PCI PROFIBUS, 1-channel |
| FC3102 | PC Fieldbus Cards, PCI PROFIBUS, 2-channel |
| FC3121 | PC Fieldbus Cards, PCI Express PROFIBUS, 1-channel |
| FC3122 | PC Fieldbus Cards, PCI Express PROFIBUS, 2-channel |
| FC3151 | PC Fieldbus Cards, Mini PCI PROFIBUS, 1-channel |
| FC5101 | PC Fieldbus Cards, PCI CANopen, 1-channel |
| FC5102 | PC Fieldbus Cards, PCI CANopen, 2-channel |
| FC5121 | PC Fieldbus Cards, PCI Express CANopen, 1-channel |
| FC5122 | PC Fieldbus Cards, PCI Express CANopen, 2-channel |
| FC5151 | PC Fieldbus Cards, Mini PCI CANopen, 1-channel |
| FC5201 | PC Fieldbus Cards, PCI DeviceNet, 1-channel |
| FC5202 | PC Fieldbus Cards, PCI DeviceNet, 2-channel |
| FC5251 | PC Fieldbus Cards, Mini PCI DeviceNet, 1-channel |
| FC7501 | PC Fieldbus Cards, PCI SERCOS interface, 1-channel |
| FC7502 | PC Fieldbus Cards, PCI SERCOS interface, 2-channel |
| FC7551 | PC Fieldbus Cards, Mini PCI SERCOS interface, 1-channel |
| FC9001-0010 | PC Fieldbus Cards, PCI Ethernet 10/100 Mbit/s, 1-channel |
| FC9002 | PC Fieldbus Cards, PCI Ethernet, 2-channel |
| FC9004 | PC Fieldbus Cards, PCI Ethernet, 4-channel |
| FC9011 | PC Fieldbus Cards, PCI Ethernet 10/100/1000 Mbit/s, 1-channel |
| FC9022 | PC Fieldbus Cards, PCI Express Ethernet, 10/100/1000 Mbit/s, 2-channel |
| FC9024 | PC Fieldbus Cards, PCI Express Ethernet, 10/100/1000 Mbit/s, 4-channel |
| FC9051 | PC Fieldbus Cards, Mini PCI Ethernet 10/100 Mbit/s, 1-channel |
| FC9062 | Gigabit Ethernet PC module, 2-channel, PCI Express x1 bus |
| FC9151 | PC Fieldbus Cards, Mini PCI Ethernet 10/100/1000 Mbit/s, 1-channel |
| Fieldbus Box | Compact IP 67 modules |
| Fieldbus Module | Fieldbus Modules with multi-thermocouple connection |
| FM3312-B110 | Fieldbus Module with 12-channel thermocouple connection, EtherCAT interface |
| FM3312-B310 | Fieldbus Module with 12-channel thermocouple connection, PROFIBUS interface |
| FM3332-B110 | Fieldbus Module with 32-channel thermocouple connection, EtherCAT interface |
| FM3332-B310 | Fieldbus Module with 32-channel thermocouple connection, PROFIBUS interface |
| Functions, TwinCAT 3 | Functions for the extension of the TwinCAT 3 basic components |
| G | |
| Guide rails | XTS guide rails |
| H | |
| HD Bus Terminals | 16 channels in 12 mm terminal block format |
| HD EtherCAT Terminals | 16 channels in 12 mm terminal block format |
| Hydraulic | Hydraulic Positioning with TwinCAT |
| I | |
| IE100x | Fieldbus Box, Extension Box, 8 digital inputs 24 V DC, 3.0 ms filter |
| IE101x | Fieldbus Box, Extension Box, 8 digital inputs 24 V DC, 0.2 ms filter |
| IE1502 | Fieldbus Box, Extension Box, up/down counter, 24 V DC, 100 kHz |
| IE200x | Fieldbus Box, Extension Box, 8 digital outputs 24 V DC, 0.5 A |
| IE202x | Fieldbus Box, Extension Box, 8 digital outputs 24 V DC, 2 A (IS = 4 A) |
| IE204x | Fieldbus Box, Extension Box, 8 digital outputs 24 V DC, 2 A (IS = 12 A) |
| IE230x | Fieldbus Box, Extension Box, 4 digital inputs 24 V, 3.0 ms, 4 digital outputs 24 V, 0.5 A |
| IE231x | Fieldbus Box, Extension Box, 4 digital inputs 24 V DC, 0.2 ms, 4 digital outputs 24 V DC, 0.5 A |
| IE232x | Fieldbus Box, Extension Box, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, 2 A (IS = 4 A) |
| IE233x | Fieldbus Box, Extension Box, 4 digital inputs 24 V DC, 0.2 ms, 4 digital outputs 24 V DC, 2 A (IS = 4 A) |
| IE2403 | Fieldbus Box, Extension Box, 16 digital combined inputs/outputs 24 V DC, 3.0 ms, 24 V DC, 0.5 A (connector with spring-loaded system) |
| IE240x | Fieldbus Box, Extension Box, 16 digital combined inputs/outputs 24 V DC, 3.0 ms, 24 V DC, 0.5 A (4-pin) |
| IE2512 | Fieldbus Box, Extension Box, 2 digital pulse-width outputs 24 V DC, 2.5 A |
| IE2808 | Fieldbus Box, Extension Box, 16 digital outputs, D-sub, 25-pin, 24 V DC, 0.5 A |
| IE3102 | Fieldbus Box, Extension Box, 4 differential analog inputs -10…+10 V, 16 bit |
| IE3112 | Fieldbus Box, Extension Box, 4 differential analog inputs 0/4…20 mA, 16 bit |
| IE3202 | Fieldbus Box, Extension Box, 4 analog RTD inputs for resistance thermometer (PT100), 16 bit |
| IE3312 | Fieldbus Box, Extension Box, 4 analog TC inputs for thermocouples, 16 bit |
| IE4112 | Fieldbus Box, Extension Box, 4 analog outputs 0/4…20 mA, 16 bit |
| IE4132 | Fieldbus Box, Extension Box, 4 analog outputs -10…+10 V, 16 bit |
| IE5009 | Fieldbus Box, Extension Box, SSI encoder interface |
| IE5109 | Fieldbus Box, Extension Box, incremental encoder interface with complementary inputs, 1 MHz |
| IE6002 | Fieldbus Box, Extension Box, serial interface RS232 |
| IE6012 | Fieldbus Box, Extension Box, serial interface, 0…20 mA (TTY) |
| IE6022 | Fieldbus Box, Extension Box, serial interface RS422, RS485 |
| IExxxx | Fieldbus Box, Extension Box |
| IL230x-B110 | Fieldbus Box, Coupler Box for EtherCAT system, with IP-Link interface |
| IL230x-B200 | Fieldbus Box, Coupler Box for Lightbus system, with IP-Link interface |
| IL230x-B310 | Fieldbus Box, Coupler Box for PROFIBUS system (12 Mbaud), with IP-Link interface |
| IL230x-B318 | Fieldbus Box, Coupler Box for PROFIBUS system (12 Mbaud), with IP-Link interface, with integrated tee-connector |
| IL230x-B400 | Fieldbus Box, Coupler Box for Interbus system, with IP-Link interface |
| IL230x-B510 | Fieldbus Box, Coupler Box for CANopen system, with IP-Link interface |
| IL230x-B518 | Fieldbus Box, Coupler Box for CANopen system, with IP-Link interface, with integrated tee-connector |
| IL230x-B520 | Fieldbus Box, Coupler Box for DeviceNet system, with IP-Link interface |
| IL230x-B528 | Fieldbus Box, Coupler Box for DeviceNet system, with IP-Link interface, with integrated tee-connector |
| IL230x-B730 | Fieldbus Box, Coupler Box for Modbus system, with IP-Link interface |
| IL230x-B800 | Fieldbus Box, Coupler Box for RS485 system, with IP-Link interface |
| IL230x-B810 | Fieldbus Box, Coupler Box for RS232 system, with IP-Link interface |
| IL230x-B900 | Fieldbus Box, Coupler Box for Ethernet TCP/IP system, with IP-Link interface, RJ45 socket |
| IL230x-B901 | Fieldbus Box, Coupler Box for Ethernet TCP/IP system, with IP-Link interface, D-coded M12 socket |
| IL230x-B903 | Fieldbus Box, Coupler Box for PROFINET system, with IP-Link interface |
| IL230x-B905 | Fieldbus Box, Coupler Box for EtherNet/IP system, with IP-Link interface |
| IL230x-Bxxx | Fieldbus Box, Coupler Box, 4 digital inputs, 4 digital outputs, with IP-Link interface |
| IL230x-C310 | Fieldbus Box, PLC Box for PROFIBUS system (12 Mbaud), with IP-Link interface, IEC 61131-3 |
| IL230x-C318 | Fieldbus Box, PLC Box for PROFIBUS system (12 Mbaud), with IP-Link interface, IEC 61131-3, with integrated tee-connector |
| IL230x-C810 | Fieldbus Box, PLC Box for RS232 system, with IP-Link interface, IEC 61131-3 |
| IL230x-C900 | Fieldbus Box, PLC Box for Ethernet TCP/IP system, with IP-Link interface, IEC 61131-3 |
| IL230x-Cxxx | Fieldbus Box, PLC Box, 4 digital inputs, 4 digital outputs, with IP-Link interface IEC 61131-3 |
| Infrastructure | EtherCAT infrastructure components |
| Interbus Bus Coupler K-bus | Bus Couplers for Interbus, BK4000, BK4020 |
| Interbus Fieldbus Box | Fieldbus Box for Interbus system, IPxxxx-B400, IL230x-B400 |
| IP100x-Bxxx | Fieldbus Box, Compact Box, 8 digital inputs 24 V DC, 3.0 ms filter |
| IP101x-Bxxx | Fieldbus Box, Compact Box, 8 digital inputs 24 V DC, 0.2 ms filter |
| IP1502-Bxxx | Fieldbus Box, Compact Box, 2-channel up/down counter, 24 V DC, 100 kHz |
| IP200x-Bxxx | Fieldbus Box, Compact Box, 8 digital outputs 24 V DC, IMAX = 0.5 A |
| IP202x-Bxxx | Fieldbus Box, Compact Box, 8 digital outputs 24 V DC, IMAX = 2 A (IS = 4 A) |
| IP204x-Bxxx | Fieldbus Box, Compact Box, 8 digital outputs 24 V DC, IMAX = 2 A (IS = 12 A) |
| IP2512-Bxxx | Fieldbus Box, Compact Box, 2-channel pulse width outputs 24 V DC, IMAX = 2.5 A |
| IP3102-Bxxx | Fieldbus Box, Compact Box, 4 differential analog inputs -10…+10 V, 16 bit |
| IP3112-Bxxx | Fieldbus Box, Compact Box, 4 differential analog inputs 0/4…20 mA, 16 bit |
| IP3202-Bxxx | Fieldbus Box, Compact Box, 4 analog RTD inputs for resistance sensors PT100…1000, Ni100, Ni120, Ni1000, 16 bit |
| IP3312-Bxxx | Fieldbus Box, Compact Box, 4 analog TC inputs for thermocouples, types J, K, L, B, E, N, R, S, T, U, 16 bit |
| IP4112-Bxxx | Fieldbus Box, Compact Box, 4 analog outputs 0/4…20 mA, 16 bit |
| IP4132-Bxxx | Fieldbus Box, Compact Box, 4 analog outputs -10…+10 V, 16 bit |
| IP5009-Bxxx | Fieldbus Box, Compact Box, 1-channel SSI encoder interface |
| IP5109-Bxxx | Fieldbus Box, Compact Box, 1-channel incremental encoder interface with complementary inputs, 1 MHz |
| IP5209-Bxxx | Fieldbus Box, Compact Box, 1-channel SinCos encoder interface, 1 VSS |
| IP5209-Bxxx-1000 | Fieldbus Box, Compact Box, 1-channel SinCos encoder interface, 11 µASS |
| IP6002-Bxxx | Fieldbus Box, Compact Box, 1-channel serial interface RS232 |
| IP6012-Bxxx | Fieldbus Box, Compact Box, 1-channel serial interface, 0…20 mA (TTY) |
| IP6022-Bxxx | Fieldbus Box, Compact Box, 1-channel serial interface RS422, RS485 |
| IPxxxx-B200 | Fieldbus Box, Compact Box for Lightbus system |
| IPxxxx-B310 | Fieldbus Box, Compact Box for PROFIBUS system (12 Mbaud) |
| IPxxxx-B318 | Fieldbus Box, Compact Box for PROFIBUS system (12 Mbaud), with integrated tee-connector |
| IPxxxx-B400 | Fieldbus Box, Compact Box for Interbus system |
| IPxxxx-B510 | Fieldbus Box, Compact Box for CANopen system |
| IPxxxx-B518 | Fieldbus Box, Compact Box for CANopen system, with integrated tee-connector |
| IPxxxx-B520 | Fieldbus Box, Compact Box for DeviceNet system |
| IPxxxx-B528 | Fieldbus Box, Compact Box for DeviceNet system, with integrated tee-connector |
| IPxxxx-B730 | Fieldbus Box, Compact Box for Modbus system |
| IPxxxx-B800 | Fieldbus Box, Compact Box for RS485 system |
| IPxxxx-B810 | Fieldbus Box, Compact Box for RS232 system |
| K | |
| K7xxx | KT7xxx | Additional keyboard for Control Panels |
| Keyboard | Additional keyboard for Control Panels |
| KL1002 | KS1002 | Bus Terminal, 2 digital inputs 24 V DC, 3.0 ms filter |
| KL1012 | KS1012 | Bus Terminal, 2 digital inputs 24 V DC, 0.2 ms filter |
| KL1032 | KS1032 | Bus Terminal, 2 digital inputs 48 V DC, 3.0 ms filter |
| KL1052 | KS1052 | Bus Terminal, 2 digital inputs 24 V DC, p/n-switching, 3.0 ms filter |
| KL1104 | KS1104 | Bus Terminal, 4 digital inputs 24 V DC, 3.0 ms filter |
| KL1114 | KS1114 | Bus Terminal, 4 digital inputs 24 V DC, 0.2 ms filter |
| KL1124 | KS1124 | Bus Terminal, 4 digital inputs 5 V DC, 0.2 ms filter |
| KL1154 | KS1154 | Bus Terminal, 4 digital inputs 24 V DC, p/n-switching, 3.0 ms filter |
| KL1164 | KS1164 | Bus Terminal, 4 digital inputs 24 V DC, p/n-switching, 0.2 ms filter |
| KL1184 | KS1184 | Bus Terminal, 4 digital inputs 24 V DC, negative switching, 3.0 ms filter |
| KL1194 | KS1194 | Bus Terminal, 4 digital inputs 24 V DC, negative switching, 0.2 ms filter |
| KL1212 | KS1212 | Bus Terminal, 2 digital inputs 24 V DC, with short-circuit protected sensor supply and diagnostics, 3.0 ms filter |
| KL1232 | KS1232 | Bus Terminal, 2 digital inputs 24 V DC, with edge triggered pulse expansion |
| KL1302 | KS1302 | Bus Terminal, 2 digital inputs 24 V DC for type 2 sensors, 3.0 ms filter |
| KL1304 | KS1304 | Bus Terminal, 4 digital inputs 24 V DC for type 2 sensors, 3.0 ms filter |
| KL1312 | KS1312 | Bus Terminal, 2 digital inputs 24 V DC for type 2 sensors, 0.2 ms filter |
| KL1314 | KS1314 | Bus Terminal, 4 digital inputs 24 V DC for type 2 sensors, 0.2 ms filter |
| KL1352 | KS1352 | Bus Terminal, 2 digital inputs for Namur sensors |
| KL1362 | KS1362 | Bus Terminal, 2 digital inputs, break-in alarm |
| KL1382 | KS1382 | Bus Terminal, 2 digital inputs, thermistor |
| KL1402 | KS1402 | Bus Terminal, 2 digital inputs, 24 V DC, 3.0 ms filter, IEC 61131-2, type 3 |
| KL1404 | KS1404 | Bus Terminal, 4 digital inputs, 24 V DC, 3.0 ms filter, IEC 61131-2, type 3 |
| KL1408 | KS1408 | Bus Terminal, 8 digital inputs, 24 V DC, 3.0 ms filter, IEC 61131-2, type 3 |
| KL1412 | KS1412 | Bus Terminal, 2 digital inputs, 24 V DC, 0.2 ms filter, IEC 61131-2, type 3 |
| KL1414 | KS1414 | Bus Terminal, 4 digital inputs, 24 V DC, 0.2 ms filter, IEC 61131-2, type 3 |
| KL1418 | KS1418 | Bus Terminal, 8 digital inputs, 24 V DC, 0.2 ms filter, IEC 61131-2, type 3 |
| KL1434 | KS1434 | Bus Terminal, 4 digital inputs, 24 V DC, 0.2 ms filter, input current 6 mA typ. |
| KL1488 | KS1488 | Bus Terminal, 8 digital inputs, 24 V DC, 3.0 ms filter, negative switching |
| KL1498 | KS1498 | Bus Terminal, 8 digital inputs, 24 V DC, 0.2 ms filter, negative switching |
| KL1501 | KS1501 | Bus Terminal, up/down counter 24 V DC, 100 kHz, 32 bit |
| KL1512 | KS1512 | Bus Terminal, up/down counter 24 V DC, 1 kHz, 16 bit |
| KL1702 | KS1702 | Bus Terminal, 2 digital inputs, 120…230 V AC |
| KL1712 | KS1712 | Bus Terminal, 2 digital inputs, 120 V AC/DC |
| KL1712-0060 | KS1712-0060 | Bus Terminal, 2 digital inputs 60 V DC |
| KL1722 | KS1722 | Bus Terminal, 2 digital inputs, 120…230 V AC without power contacts |
| KL1804 | Bus Terminal, 4 digital inputs 24 V DC, 8 x 24 V DC, 4 x 0 V DC, 3.0 ms filter, 3-wire connection |
| KL1808 | Bus Terminal, 8 digital inputs 24 V DC, 8 x 24 V DC, 3.0 ms filter, 2-wire connection |
| KL1809 | Bus Terminal, 16 digital inputs 24 V DC, filter 3.0 ms, type 3 |
| KL1814 | Bus Terminal, 4 digital inputs 24 V DC, 8 x 24 V DC, 4 x 0 V DC, 0.2 ms filter, 3-wire connection |
| KL1819 | Bus Terminal, 16 digital inputs 24 V DC, filter 0.2 ms, type 3 |
| KL1859 | Bus Terminal, 8 digital inputs + 8 digital outputs 24 V DC, filter 3.0 ms, type 3, 0.5 A |
| KL1862 | Bus Terminal, 16 digital inputs 24 V DC, filter 3.0 ms, flat-ribbon cable connection, type 3 |
| KL1872 | Bus Terminal, 16 digital inputs 24 V DC, filter 0.2 ms, flat-ribbon cable connection, type 3 |
| KL1889 | Bus Terminal, 16 digital inputs 24 V DC, filter 3.0 ms, 0 V (ground) switching |
| KL1904 | Bus Terminal, 4 fail-safe inputs, TwinSAFE, 24 V DC |
| KL2012 | KS2012 | Bus Terminal, 2 digital outputs 24 V DC, 0.5 A |
| KL2022 | KS2022 | Bus Terminal, 2 digital outputs 24 V DC, 2.0 A |
| KL2032 | KS2032 | Bus Terminal, 2 digital outputs 24 V DC, 0.5 A with reverse connection protection |
| KL2114 | KS2114 | Bus Terminal, 4 digital outputs 24 V DC, 0.5 A |
| KL2124 | KS2124 | Bus Terminal, 4 digital outputs 5 V DC, 0.02 A |
| KL2134 | KS2134 | Bus Terminal, 4 digital outputs 24 V DC, 0.5 A with reverse connection protection |
| KL2184 | KS2184 | Bus Terminal, 4 digital outputs 24 V DC, negative switching, 0.5 A |
| KL2212 | KS2212 | Bus Terminal, 2 digital outputs 24 V DC, 0.5 A, diagnostic function for wire break and overload |
| KL2284 | KS2284 | Bus Terminal, 4 digital outputs 24 V DC, 2 A, reverse switching |
| KL2404 | KS2404 | Bus Terminal, 4 digital outputs, 24 V DC, 0.5 A |
| KL2408 | KS2408 | Bus Terminal, 8 digital outputs, 24 V DC, 0.5 A |
| KL2424 | KS2424 | Bus Terminal, 4 digital outputs, 24 V DC, 2.0 A |
| KL2442 | Bus Terminal, 2 digital outputs, 24 V DC, 2 x 4 A/1 x 8 A |
| KL2488 | KS2488 | Bus Terminal, 8 digital outputs, 24 V DC, 0.5 A, negative switching |
| KL2502 | KS2502 | Bus Terminal, 2 digital pulse width outputs 24 V DC, 0.1 A |
| KL2512 | KS2512 | Bus Terminal, 2-channel pulse width output terminal 24 V DC, 1 A, negative switching |
| KL2521 | KS2521 | Bus Terminal, 1 pulse train output, 2 RS422 outputs (5 V level) |
| KL2521-0024 | KS2521-0024 | Bus Terminal, 1 pulse train output, 2 outputs 24 V DC (supplied from an external source) |
| KL2531 | KS2531 | Bus Terminal, 1 digital stepper motor output, 24 V DC, 1.5 A |
| KL2532 | KS2532 | Bus Terminal, 2-channel DC motor output stage, 24 V DC, 1 A |
| KL2535 | KS2535 | Bus Terminal, 2-channel pulse width current terminal 24 V DC, 1 A |
| KL2541 | KS2541 | Bus Terminal, 1 digital stepper motor output, 50 V DC, 5.0 A, incremental encoder |
| KL2545 | KS2545 | Bus Terminal, 2-channel pulse width current terminal 50 V DC, 3.5 A |
| KL2552 | KS2552 | Bus Terminal, 2-channel DC motor output stage, 50 V DC, 5 A |
| KL2602 | KS2602 | Bus Terminal, 2 relay outputs, 230 V AC, 2 A, make contacts |
| KL2612 | KS2612 | Bus Terminal, 2 relay outputs, 125 V AC, 0.5 A, potential-free change-over |
| KL2622 | KS2622 | Bus Terminal, 2 relay outputs, 230 V AC, 2 A, potential-free make contacts |
| KL2631 | KS2631 | Bus Terminal, 1 relay output, 400 V AC, 3.75 A, make contact |
| KL2641 | Bus Terminal, 1 relay output, 230 V AC, 16 A, manual operation |
| KL2652 | KS2652 | Bus Terminal, 2 relay outputs, 230 V AC, 1 A, isolated change-over |
| KL2692 | KS2692 | Bus Terminal, cycle monitoring terminal (watchdog) |
| KL2701 | KS2701 | Bus Terminal, 1-channel solid state load relay up to 230 V AC/DC, 3 A, solid state load relay |
| KL2702 | KS2702 | Bus Terminal, 2 solid state outputs, 230 V AC, 0.3 A |
| KL2702-0002 | Bus Terminal, 2 solid state outputs, 230 V AC, 2.0 A |
| KL2702-0020 | Bus Terminal, 2 solid state outputs, 230 V AC, 1.5 A |
| KL2712 | KS2712 | Bus Terminal, 2 triac outputs, 12…230 V AC, 0.01…0.5 A |
| KL2722 | KS2722 | Bus Terminal, 2 triac outputs, 12…230 V AC, 1 A |
| KL2732 | KS2732 | Bus Terminal, 2 triac outputs, 12…230 V AC, 1 A, without power contacts |
| KL2751 | KS2751 | Bus Terminal, 1-channel universal dimmer terminal, 230 V AC, 300 VA (W) |
| KL2761 | KS2761 | Bus Terminal, 1-channel universal dimmer terminal, 230 V AC, 600 VA (W) |
| KL2784 | KS2784 | Bus Terminal, 4 digital outputs 30 V DC, 1 A, short-circuit-proof |
| KL2791 | KS2791 | Bus Terminal, 1-channel AC motor speed controller, 230 V AC, 200 VA |
| KL2794 | KS2794 | Bus Terminal, 4 digital outputs 30 V DC, 2 A, potential-free, short-circuit-proof |
| KL2798 | Bus Terminal, 8 digital outputs 30 V AC/DC, 2 A, solid state |
| KL2808 | Bus Terminal, 8 digital outputs 24 V DC, 8 x 0 V DC, 0.5 A |
| KL2809 | Bus Terminal, 16 digital outputs 24 V DC, 0.5 A |
| KL2819 | Bus Terminal, 16 digital outputs 24 V DC, 0.5 A, with diagnostics |
| KL2828 | Bus Terminal, 8 digital outputs, 24 V DC, 2 A, total current 10 A |
| KL2872 | Bus Terminal, 16 digital outputs, 24 V DC, 0.5 A, flat-ribbon cable connection |
| KL2889 | Bus Terminal, 16 digital outputs 24 V DC, 0.5 A, 0 V (ground) switching |
| KL2904 | Bus Terminal, 4 fail-safe outputs, TwinSAFE, 24 V DC, 0.5 A |
| KL3001 | KS3001 | Bus Terminal, 1 differential analog input -10…+10 V, 12 bit |
| KL3002 | KS3002 | Bus Terminal, 2 differential analog inputs -10…+10 V, 12 bit |
| KL3011 | KS3011 | Bus Terminal, 1 differential analog input 0…20 mA, 12 bit |
| KL3012 | KS3012 | Bus Terminal, 2 differential analog inputs 0…20 mA, 12 bit |
| KL3021 | KS3021 | Bus Terminal, 1 differential analog input 4…20 mA, 12 bit |
| KL3022 | KS3022 | Bus Terminal, 2 differential analog inputs 4…20 mA, 12 bit |
| KL3041 | KS3041 | Bus Terminal, 1 analog input 0…20 mA with power supply for measuring transducer, 12 bit |
| KL3042 | KS3042 | Bus Terminal, 2 analog inputs 0…20 mA with power supply for measuring transducer, 12 bit |
| KL3044 | KS3044 | Bus Terminal, 4 analog inputs 0…20 mA, 12 bit |
| KL3051 | KS3051 | Bus Terminal, 1 analog input 4…20 mA with power supply for measuring transducer, 12 bit |
| KL3052 | KS3052 | Bus Terminal, 2 analog inputs 4…20 mA with power supply for measuring transducer, 12 bit |
| KL3054 | KS3054 | Bus Terminal, 4 analog inputs 4…20 mA, 12 bit |
| KL3061 | KS3061 | Bus Terminal, 1 analog input 0…10 V, single-ended, 12 bit |
| KL3062 | KS3062 | Bus Terminal, 2 analog inputs 0…10 V, single-ended, 12 bit |
| KL3064 | KS3064 | Bus Terminal, 4 analog inputs 0…10 V, single-ended, 12 bit |
| KL3102 | KS3102 | Bus Terminal, 2 differential analog inputs -10…+10 V, 16 bit |
| KL3112 | KS3112 | Bus Terminal, 2 differential analog inputs 0…20 mA, 16 bit |
| KL3122 | KS3122 | Bus Terminal, 2 differential analog inputs 4…20 mA, 16 bit |
| KL3132 | KS3132 | Bus Terminal, 2 differential analog inputs -10…+10 V, 16 bit, ±0.05 % accuracy |
| KL3142 | KS3142 | Bus Terminal, 2 differential analog inputs 0…20 mA, 16 bit, ±0.05 % accuracy |
| KL3152 | KS3152 | Bus Terminal, 2 differential analog inputs 4…20 mA, 16 bit, ±0.05 % accuracy |
| KL3162 | KS3162 | Bus Terminal, 2 differential analog inputs 0…10 V, 16 bit, ±0.05 % accuracy |
| KL3172 | KS3172 | Bus Terminal, 2 differential analog inputs 0…2 V, 16 bit, ±0.05 % accuracy |
| KL3182 | KS3182 | Bus Terminal, 2 differential analog inputs -2…+2 V, 16 bit, ±0.05 % accuracy |
| KL3201 | KS3201 | Bus Terminal, 1 analog RTD input for resistance thermometers (PT100), 16 bit |
| KL3202 | KS3202 | Bus Terminal, 2 analog RTD inputs for resistance thermometers (PT100), 16 bit |
| KL3204 | KS3204 | Bus Terminal, 4 analog RTD inputs for resistance thermometers (PT100), 16 bit |
| KL3204 | KS3204 | Bus Terminal, 4 analog inputs for NTC (10 kΩ) for resistance sensors, 16 bit |
| KL3208-0010 | Bus Terminal, 8 analog inputs PT1000, Ni1000, potentiometer 1 kΩ, 5 kΩ or 10 kΩ, NTC 1,8 k, NTC 2,2 k, NTC 3 k, NTC 5 k, NTC 10 k, NTC 20 k, NTC 100 k, for resistance thermometers |
| KL3214 | Bus Terminal, 4-channel input PT100 (RTD) for resistance sensors, 16 bit |
| KL3222 | KS3222 | Bus Terminal, 2 analog inputs RTD for resistance thermometers (PT100), high-precision |
| KL3228 | KS3228 | Bus Terminal, 8 analog RTD inputs for resistance thermometers PT1000/Ni1000 |
| KL3311 | Bus Terminal, 1 analog TC input for thermocouples, 16 bit |
| KL3312 | Bus Terminal, 2 analog TC inputs for thermocouples, 16 bit |
| KL3314 | Bus Terminal, 4 analog TC inputs for thermocouples, 16 bit |
| KL3351 | KS3351 | Bus Terminal, 1 analog input, resistance bridge (strain gauge), 16 bit |
| KL3356 | KS3356 | Bus Terminal, 1 analog input for accurate resistance bridge evaluation, 16 bit |
| KL3361 | KS3361 | Bus Terminal, 1 analog oscilloscope input -20…+20 mV, 14 bit |
| KL3362 | KS3362 | Bus Terminal, 2 analog oscilloscope inputs -10…+10 V, 14 bit |
| KL3403 | KS3403 | Bus Terminal, 3-phase power measurement terminal, 16 bit |
| KL3404 | KS3404 | Bus Terminal, 4 differential analog inputs -10…+10 V, 12 bit |
| KL3408 | KS3408 | Bus Terminal, 8 differential analog inputs -10…+10 V, 12 bit |
| KL3444 | KS3444 | Bus Terminal, 4 differential analog inputs 0…20 mA, 12 bit |
| KL3448 | KS3448 | Bus Terminal, 8 differential analog inputs 0…20 mA, 12 bit |
| KL3454 | KS3454 | Bus Terminal, 4 differential analog inputs 4…20 mA, 12 bit |
| KL3458 | KS3458 | Bus Terminal, 8 differential analog inputs 4…20 mA, 12 bit |
| KL3464 | KS3464 | Bus Terminal, 4 analog inputs 0…10 V, single-ended, 12 bit |
| KL3468 | KS3468 | Bus Terminal, 8 analog inputs 0…10 V, single-ended, 12 bit |
| KL3681 | KS3681 | Bus Terminal, digital multimeter terminal |
| KL4001 | KS4001 | Bus Terminal, 1 analog output 0…10 V DC, 12 bit |
| KL4002 | KS4002 | Bus Terminal, 2 analog outputs 0…10 V DC, 12 bit |
| KL4004 | KS4004 | Bus Terminal, 4 analog outputs 0…10 V DC, 12 bit |
| KL4011 | KS4011 | Bus Terminal, 1 analog output 0…20 mA, 12 bit |
| KL4012 | KS4012 | Bus Terminal, 2 analog outputs 0…20 mA, 12 bit |
| KL4021 | KS4021 | Bus Terminal, 1 analog output 4…20 mA, 12 bit |
| KL4022 | KS4022 | Bus Terminal, 2 analog outputs 4…20 mA, 12 bit |
| KL4031 | KS4031 | Bus Terminal, 1 analog output -10…+10 V DC, 12 bit |
| KL4032 | KS4032 | Bus Terminal, 2 analog outputs -10…+10 V DC, 12 bit |
| KL4034 | KS4034 | Bus Terminal, 4 analog outputs -10…+10 V DC, 12 bit |
| KL4112 | KS4112 | Bus Terminal, 2 analog outputs 0…20 mA, 15 bit, configurable 16 bit |
| KL4132 | KS4132 | Bus Terminal, 2 analog outputs -10…+10 V DC, 16 bit |
| KL4404 | KS4404 | Bus Terminal, 4 analog outputs 0…10 V DC, 12 bit |
| KL4408 | KS4408 | Bus Terminal, 8 analog outputs 0…10 V DC, 12 bit |
| KL4414 | KS4414 | Bus Terminal, 4 analog outputs 0…20 mA, 12 bit |
| KL4418 | KS4418 | Bus Terminal, 8 analog outputs 0…20 mA, 12 bit |
| KL4424 | KS4424 | Bus Terminal, 4 analog outputs 4…20 mA, 12 bit |
| KL4428 | KS4428 | Bus Terminal, 8 analog outputs 4…20 mA, 12 bit |
| KL4434 | KS4434 | Bus Terminal, 4 analog outputs -10…+10 V DC, 12 bit |
| KL4438 | KS4438 | Bus Terminal, 8 analog outputs -10…+10 V DC, 12 bit |
| KL4494 | KS4494 | Bus Terminal, 2 analog inputs -10…+10 V, 2 analog outputs -10…+10 V, 12 bit |
| KL5001 | KS5001 | Bus Terminal, SSI encoder interface |
| KL5051 | KS5051 | Bus Terminal, SSI encoder interface, bi-directional for digifas® drives |
| KL5101 | KS5101 | Bus Terminal, incremental encoder interface with complementary inputs |
| KL5111 | KS5111 | Bus Terminal, incremental encoder interface with single inputs |
| KL5121 | KS5121 | Bus Terminal, linear motion controller terminal with 4 switching outputs |
| KL5151 | KS5151 | Bus Terminal, incremental encoder interface |
| KL5152 | KS5152 | Bus Terminal, 2-channel incremental encoder interface |
| KL6001 | KS6001 | Bus Terminal, RS232 serial interface, 9.6 kbaud |
| KL6011 | KS6011 | Bus Terminal, 20 mA current loop serial interface TTY |
| KL6021 | KS6021 | Bus Terminal, RS422/RS485 serial interface, 9.6 kbaud |
| KL6023 | Bus Terminal, Wireless Adapter for EnOcean radio technology |
| KL6031 | KS6031 | Bus Terminal, serial interface RS232, 115.2 kbaud |
| KL6041 | KS6041 | Bus Terminal, serial interface RS422/RS485, 115.2 kbaud |
| KL6051 | KS6051 | Bus Terminal, data exchange terminal, 32 bit serial |
| KL6201 | KS6201 | Bus Terminal, AS-Interface master terminal |
| KL6211 | KS6211 | Bus Terminal, AS-Interface master terminal with power contacts |
| KL6224 | Bus Terminal, IO-Link terminal |
| KL6301 | Bus Terminal, EIB/KNX Bus Terminal |
| KL6401 | Bus Terminal, LON Bus Terminal |
| KL6581 | Bus Terminal, EnOcean master terminal |
| KL6583 | Bus Terminal, EnOcean transmitter and receiver, 868.35 MHz |
| KL6771 | KS6771 | Bus Terminal, MP-Bus master terminal |
| KL6781 | Bus Terminal, M-Bus master terminal |
| KL6811 | KS6811 | Bus Terminal, DALI/DSI master and power supply terminal |
| KL6831 | Bus Terminal, SMI, LoVo |
| KL6841 | Bus Terminal, SMI, 230 V AC |
| KL6904 | Bus Terminal, TwinSAFE Logic Bus Terminal, 4 fail-safe outputs 24 V DC, 0.5 A |
| KL8001 | Bus Terminal, power terminal with adapter for Siemens contactor, series Sirius 3R |
| KL8500 | manual operating module, placeholder module |
| KL8519 | manual operating module, 16-channel digital input module, 24 V DC, filter 3.0 ms |
| KL8524 | manual operating module, 4 x 2-channel digital output module, 24 V DC, 0.5 A |
| KL8528 | manual operating module, 8-channel digital output module, 24 V DC, 0.5 A |
| KL8548 | manual operating module, 8-channel analog output module, 0…10 V, 12 bits |
| KL8601 | Bus Terminal, communication module for TeSys model U |
| KL8610 | Bus Terminal, adapter terminal for TeSys model U |
| KL9010 | Bus Terminal, bus end terminal |
| KL9020 | Bus Terminal, terminal bus extension end terminal |
| KL9050 | Bus Terminal, terminal bus extension coupler terminal |
| KL9060 | Bus Terminal, adapter terminal for power terminal KL8xxx |
| KL9070 | Bus Terminal, shield terminal, 8 x shield |
| KL9080 | Bus Terminal, isolation terminal |
| KL9100 | KS9100 | Bus Terminal, passive potential feed terminal, 24 V DC |
| KL9110 | KS9110 | Bus Terminal, potential feed terminal with diagnostics, 24 V DC |
| KL9150 | KS9150 | Bus Terminal, passive potential feed terminal, 230 V AC |
| KL9160 | KS9160 | Bus Terminal, potential feed terminal with diagnostics, 230 V AC |
| KL9180 | KS9180 | Bus Terminal, potential distribution terminal with 2 terminal locations per power contact |
| KL9181 | Bus Terminal, potential distribution terminal, 2 x 8 connected terminal points |
| KL9182 | Bus Terminal, potential distribution terminal, 8 x 2 connected terminal points |
| KL9183 | Bus Terminal, potential distribution terminal, 1 x 16 connected terminal points |
| KL9184 | Bus Terminal, potential distribution terminal, 8 x 24 V contact, 8 x 0 V contact |
| KL9185 | KS9185 | Bus Terminal, potential distribution terminal with 4 terminal locations at each of two power contacts |
| KL9186 | KS9186 | Bus Terminal, potential distribution terminal, 8 x 24 V contact |
| KL9187 | KS9187 | Bus Terminal, potential distribution terminal, 8 x 0 V contact |
| KL9188 | Bus Terminal, potential distribution terminal, 16 x 24 V contact |
| KL9189 | Bus Terminal, potential distribution terminal, 16 x 0 V contact |
| KL9190 | KS9190 | Bus Terminal, potential feed terminal for any voltages up to 230 V |
| KL9195 | KS9195 | Bus Terminal, screening terminal, potential distributor terminal with connection to ground |
| KL9200 | Bus Terminal, passive potential feed terminal with fuse, 24 V DC |
| KL9210 | Bus Terminal, potential feed terminal with diagnostics and fuse, 24 V DC |
| KL9250 | Bus Terminal, passive potential feed terminal with fuse, 125…230 V AC |
| KL9260 | Bus Terminal, potential feed terminal with diagnostics and fuse, 230 V AC |
| KL9290 | Bus Terminal, passive potential feed terminal, up to 400 V AC |
| KL9300 | KS9300 | Bus Terminal, diode array terminals, 4 potential-free diodes, 1 A |
| KL9301 | KS9301 | Bus Terminal, diode array terminals, 7 diodes (common cathode), 1 A |
| KL9302 | KS9302 | Bus Terminal, diode array terminals, 7 diodes (common anode), 1 A |
| KL9309 | Bus Terminal, adapter terminal for KL85xx manual operating modules |
| KL9380 | Bus Terminal, mains filter terminal for dimmers |
| KL9400 | KS9400 | Bus Terminal, K-bus power unit 2 A and potential feed terminal, 24 V DC |
| KL9505 | KS9505 | Bus Terminal, power supply terminal 24 V DC, output 5 V DC, 0.5 A |
| KL9508 | KS9508 | Bus Terminal, power supply terminal 24 V DC, output 8 V DC, 0.5 A |
| KL9510 | KS9510 | Bus Terminal, power supply terminal 24 V DC, output 10 V DC, 0.5 A |
| KL9512 | KS9512 | Bus Terminal, power supply terminal 24 V DC, output 12 V DC, 0.5 A |
| KL9515 | KS9515 | Bus Terminal, power supply terminal 24 V DC, output 15 V DC, 0.5 A |
| KL9520 | KS9520 | Bus Terminal, AS-Interface potential feed terminal with filter, 35 V DC |
| KL9528 | KS9528 | Bus Terminal, AS-Interface power supply terminal 24 V DC, output 30 V DC, 1.25 A |
| KL9540 | KS9540 | Bus Terminal, surge filter field supply |
| KL9540-0010 | Bus Terminal, surge filter field supply for analog terminals |
| KL9550 | KS9550 | Bus Terminal, surge filter system and field supply |
| KL9560 | KS9560 | Bus Terminal, power supply terminal 24 V DC/ 24 V DC, 0.1 A |
| KL9570 | KS9570 | Bus Terminal, buffer capacitor terminal |
| KLxxxx | Fieldbus-independent electronic series terminals |
| KM1002 | Bus Terminal, 16 (2 x 8) digital inputs, 24 V DC, 3.0 ms filter |
| KM1004 | Bus Terminal, 32 (4 x 8) digital inputs, 24 V DC, 3.0 ms filter |
| KM1008 | Bus Terminal, 64 (8 x 8) digital inputs, 24 V DC, 3.0 ms filter |
| KM1012 | Bus Terminal, 16 (2 x 8) digital inputs, 24 V DC, 0.2 ms filter |
| KM1014 | Bus Terminal, 32 (4 x 8) digital inputs, 24 V DC, 0.2 ms filter |
| KM1018 | Bus Terminal, 64 (8 x 8) digital inputs, 24 V DC, 0.2 ms filter |
| KM1644 | Terminal module, 4-channel manual operation and display |
| KM2002 | Bus Terminal, 16 (2 x 8) digital outputs, 24 V DC, 0.5 A |
| KM2004 | Bus Terminal, 32 (4 x 8) digital outputs, 24 V DC, 0.5 A |
| KM2008 | Bus Terminal, 64 (8 x 8) digital outputs, 24 V DC, 0.5 A |
| KM2042 | Terminal module, 16 digital outputs 24 V, 0.5 A, D-sub connection |
| KM2604 | Terminal module, 4-channel relay module, 230 V AC, 16 A |
| KM2614 | Terminal module, 4-channel relay module, 230 V AC, 16 A, manual operation |
| KM2642 | Bus Terminal, 2 relay outputs, 230 V AC, 16 A, manual/automatic operation, relay state readable |
| KM2652 | Bus Terminal, 2 relay outputs, 230 V AC, 16 A, manual/automatic operation, switch and relay state readable |
| KM2774 | Terminal module, triac output for 4 blind motors, 230 V AC, 1.5 A with mutually locked outputs and overload protection |
| KM3701 | Terminal module, 1-channel differential pressure measuring terminal -100…+100 hPa (-100…+100 mbar) |
| KM3702 | Terminal module, 2-channel absolute pressure measuring terminal 7,500 hPa (7.5 bar) |
| KM3712 | Terminal module, 2-channel absolute pressure measuring terminal -1,000…+1,000 hPa (-1…+1 bar) |
| KM4602 | Terminal module, 2 analog outputs 0…10 V, manual/automatic operation |
| KM6551 | Terminal module, wireless data exchange terminal |
| KS2000 | Configuration software for fieldbus components |
| KS2000-Z2-USB | Accessories fieldbus components, USB cable for the connection between PC and BK, BC and LC Couplers |
| KS2000-Z3-USB | Accessories fieldbus components, USB cable for the connection between PC and Fieldbus Box |
| KS8000 | ActiveX software tool for the operation of I/O components |
| KSxxxx | Fieldbus-independent electronic series terminals with pluggable wiring |
| L | |
| LC3100 | Bus Coupler for PROFIBUS system (12 Mbaud), “Low Cost“ coupler |
| LC5100 | Bus Coupler for CANopen system, “Low Cost“ coupler |
| LC5200 | Bus Coupler for DeviceNet system, “Low Cost“ coupler |
| Lightbus | Fast fibre optic fieldbus |
| Lightbus Bus Coupler K-bus | Bus Coupler for the Lightbus system: BK2000, BK2010, BK2020 |
| Lightbus Fieldbus Box | Fieldbus Box for Lightbus system, IPxxxx-B200, IL230x-B200 |
| Lightbus interface | Interface cards for Lightbus system, C1200, C1220, C1300 |
| Lightbus modules | Peripheral modules for Lightbus system, Mxxxx |
| Lightbus PC cards | PC Fieldbus Cards with PCI bus for Lightbus system, FC2001, FC2002 |
| M | |
| M1110 | Lightbus module, 16 bit digital input/output module, IP 65, 24 V DC |
| M1200 | Lightbus module, CMOS interface module, plug-in, U = 5 V DC |
| M1210 | Lightbus module, CMOS interface module, plug-in, U = 24 V DC |
| M1400 | Lightbus module, 32 bit digital input/output module, 24 V DC |
| M1410 | Lightbus module, 16 bit digital input/output module, 24 V DC |
| M2400 | Lightbus module, 4 analog inputs and 16 digital I/O channels |
| M2510 | Lightbus module, 4 analog inputs |
| M3000 | Lightbus module, absolute encoder |
| M3100 | Lightbus module, incremental encoder connection box, IP 65 |
| M3120 | Lightbus module, 4-channel incremental encoder interface |
| M3200 | Lightbus module, incremental encoder |
| M63xx | Lightbus module, control unit with Lightbus interface |
| M-Bus master terminal | Bus Terminal, M-Bus master terminal |
| Media converters | fibre optics to copper physics and vice versa |
| MES system | Magnetic encoder system for Linear Servomotors AL2xxx |
| Mini PLC | Bus Terminal Controller BC series, IEC 61131-3 |
| Modbus Bus Coupler K-bus | Bus Couplers for Modbus system, BK73x0, BC7300 |
| Modbus Fieldbus Box | Fieldbus Box for Modbus system, IPxxxx-B730, IL230x-B730 |
| Motor module | XTS motor module |
| Mover | XTS mover |
| MP-Bus master terminal | Bus Terminal, MP Bus master terminal |
| Multi-touch built-in Control Panel | Multi-touch Control Panel CP29xx for control cabinet installation |
| Multi-touch built-in Panel PC | Multi-touch built-in Panel PC CP22xx, CP26xx and CP27xx for control cabinet installation |
| Multi-touch Control Panel | Multi-touch Control Panel CP39xx for Industrial PCs |
| Multi-touch Panel PC | Multi-touch Panel PC CP32xx and CP37xx for mounting arm installation |
| P | |
| Panel PCs | Panel PC CP62xx, CP65xx, CP66xx-xxxx-0020, CP67xx, CP72xx, CP77xx, C33xx, C36xx |
| PC Fieldbus Cards | Fieldbus interface cards with PCI bus, FCxxxx |
| PCIe Fieldbus Cards | PCI Express Fieldbus Cards |
| PROFIBUS Bus Coupler E-bus | PROFIBUS Bus Coupler for EtherCAT Terminals, EK3100 |
| PROFIBUS Bus Coupler K-bus | Bus Couplers for PROFIBUS system, BK3010, BK3100, BK3110, BK3120, BK3150, BK3520, BC3100, BC3150, BX3100, LC3100 |
| PROFIBUS Fieldbus Box | Fieldbus Box for PROFIBUS system, IPxxxx-B31x, IL230x-B31x, IL230x-C31x |
| PROFIBUS Fieldbus Module | Multi-thermocouple module with PROFIBUS interface, FM3300-B310 |
| PROFIBUS PC cards | PC Fieldbus Cards with PCI bus, FC3101, FC3102, FC3151 |
| PROFIBUS PCIe cards | PCI Express Fieldbus Cards, FC3121, FC3122 |
| PROFINET Bus Coupler K-bus | Bus Couplers for PROFINET system, BK9053, BK9103 |
| PROFINET RT Bus Coupler E-bus | PROFINET RT Bus Coupler for EtherCAT Terminals, EK9300 |
| R | |
| RFID reader | RFID reader in the Control Panel front |
| RS232 Bus Coupler K-bus | Bus Coupler with communication interface BK8100, BC8150 |
| RS232 Fieldbus Box | Fieldbus Box for RS232 system, IPxxxx-B810, IL230x-B810, IL230x-C810 |
| RS485 Bus Coupler K-bus | Bus Coupler with communication interface BK8000, BX8000 |
| RS485 Fieldbus Box | Fieldbus Box for RS485 system, IPxxxx-B800, IL230x-B800 |
| S | |
| Safety | TwinSAFE: safety and I/O technology in one system |
| SERCOS Bus Coupler K-bus | Bus Coupler for SERCOS system, BK7500, BK7520 |
| SERCOS PC cards | PC Fieldbus Cards with PCI bus for SERCOS system, FC7501, FC7502, FC7551 |
| Servo terminal | EtherCAT Terminal, Servomotor terminal, 50 V DC, 2,8 ARMS |
| Slotbox | Slotbox for extending Industrial PCs with two plug-in card slots |
| Small controllers | Bus Terminal Controller BC/BX series, IEC 61131-3 |
| Supplements, TwinCAT | TwinCAT Supplements for System, Motion, Communication, Controller, Building Automation |
| Switches | Ethernet Switches |
| T | |
| TC1000 | TC3 ADS | TwinCAT 3 ADS |
| TC1100 | TC3 I/O | TwinCAT 3 I/O |
| TC1200 | TC3 PLC | TwinCAT 3 PLC |
| TC1210 | TC3 PLC/C++ | TwinCAT 3 PLC and C++ |
| TC1220 | TC3 PLC/C++/MATLAB®/Simulink® | TwinCAT 3 PLC, C++ and modules generated in MATLAB®/Simulink® |
| TC1250 | TC3 PLC/NC PTP 10 | TwinCAT 3 PLC and NC PTP 10 |
| TC1260 | TC3 PLC/NC PTP 10/NC I | TwinCAT 3 PLC, NC PTP 10 and NC I |
| TC1270 | TC3 PLC/NC PTP 10/NC I/CNC | TwinCAT 3 PLC, NC PTP 10, NC I and CNC |
| TC1300 | TC3 C++ | TwinCAT 3 C++ |
| TC1320 | TC3 C++/MATLAB®/Simulink® | TwinCAT 3 C++ and modules generated in MATLAB®/Simulink® |
| TC9910-B110 | EtherCAT demokit, with TwinCAT PLC license |
| TC9910-B111 | EtherCAT demokit, without TwinCAT PLC license |
| TE1000 | TC3 Engineering | TwinCAT 3 engineering environment | TE1111 | TC3 EtherCAT Simulation | Easy configurations of simulation environments with several EtherCAT slaves |
| TE1120 | TC3 XCAD Interface | Transfer of existing engineering results from ECAD tools |
| TE1300 | TC3 Scope View Professional | Software oscilloscope for the graphical display of data captured from several target systems |
| TE1400 | TC3 Target for MATLAB®/Simulink® | TwinCAT target for MATLAB®/Simulink® for generating TwinCAT 3 modules |
| TE1410 | TC3 Interface for MATLAB®/Simulink® | Communication interface between MATLAB®/Simulink® and the TwinCAT 3 runtime |
| TE1500 | TC3 Valve Diagram Editor | Graphical tool for designing the characteristic curve of a hydraulic valve |
| TE1510 | TC3 Cam Design Tool | Graphic design tool for electronic cam plates |
| TF1800 | TC3 PLC HMI | Stand-alone tool for displaying visualisations from the PLC development environment |
| TF1810 | TC3 PLC HMI Web | Display of visualisations from the PLC development environment in a web browser |
| TF1910 | TC3 UML | UML (Unified Modeling Language) for modelling of PLC software |
| TF3300 | TC3 Scope Server | Data preparation for visual display in the TwinCAT 3 Scope View |
| TF3600 | TC3 Condition Monitoring Level 1 | TC3 Condition Monitoring Level 1 |
| TF3601 | TC3 Condition Monitoring Level 2 | TC3 Condition Monitoring Level 2 |
| TF3900 | TC3 Solar Position Algorithm | Precise calculation of the sun’s position |
| TF5000 | TC3 NC PTP 10 Axes | NC PTP (point-to-point movements) for up to 10 axes |
| TF5010 | TC3 NC PTP Axes Pack 25 | Extension of TwinCAT 3 NC PTP to up to 25 axes |
| TF5020 | TC3 NC PTP Axes Pack unlimited | Extension of TwinCAT 3 NC PTP to over 25 axes |
| TF5050 | TC3 NC Camming | Using the TwinCAT NC cam plate functionality (table coupling) |
| TF5055 | TC3 NC Flying Saw | Implementing “flying saw” functionality |
| TF5060 | TC3 NC FIFO Axes | Implementation of a pre-defined user setpoint generator for an NC axis |
| TF5065 | TC3 Motion Control XFC | High-precision logging and switching of digital signals in relation to axis positions |
| TF5100 | TC3 NC I | NC I with 3 interpolating axes and 5 additional axes |
| TF5110 | TC3 Kinematic Transformation L1 | Realisation of different kinematic transformations Level 1 |
| TF5111 | TC3 Kinematic Transformation L2 | Realisation of different kinematic transformations Level 2 |
| TF5112 | TC3 Kinematic Transformation L3 | Realisation of different kinematic transformations Level 3 |
| TF5113 | TC3 Kinematic Transformation L4 | Realisation of different kinematic transformations Level 4 |
| TF5120 | TC3 Robotics mxAutomation | direct communication between the PLC and the KUKA KR C4 robot control |
| TF5200 | TC3 CNC | CNC path control software |
| TF5210 | TC3 CNC E | CNC path control software export version |
| TF5220 | TC3 CNC Axes Pack | Extension to up to a total of 64 axes/controlled spindles, of which a maximum of 32 can be path axes and a maximum of 12 can be controlled spindles |
| TF5230 | TC3 CNC Channel Pack | Further CNC channel, extension to a maximum of 12 channels, channel synchronisation, axis transfer between channels |
| TF5240 | TC3 CNC Transformation | Transformation functionality (5-axis functionality) |
| TF5250 | TC3 CNC HSC Pack | Extending the CNC with HSC technology (high-speed cutting) |
| TF5260 | TC3 CNC Spline Interpolation | Path programming via splines with programmable spline type, Akima-spline, B-spline |
| TF5270 | TC3 CNC Virtual NCK Basis | Virtual TwinCAT CNC for simulation in a Windows environment |
| TF5271 | TC3 CNC Virtual NCK Options | Virtual TwinCAT CNC for simulation in a Windows environment |
| TF5850 | TC3 XTS Extension | Software license, TwinCAT TC3 XTS Extension |
| TF6000 | TC3 ADS Communication | ADS communication components |
| TF6100 | TC3 OPC UA | Access to TwinCAT in accordance with OPC UA with UA server (DA/HA/AC) and UA client (DA) |
| TF6120 | TC3 OPC DA | Access to TwinCAT variables, in accordance with OPC DA and OPC XML DA specification |
| TF6220 | TC3 EtherCAT Redundancy 250 | Extension of the TwinCAT EtherCAT master with cable redundancy capability for up to 250 slaves |
| TF6221 | TC3 EtherCAT Redundancy 250+ | Extension of the TwinCAT EtherCAT master with cable redundancy capability for more than 250 slaves |
| TF6225 | TC3 EtherCAT External Sync | Extension of the TwinCAT EtherCAT master with an option to synchronise the Beckhoff real-time communication with external signals |
| TF6250 | TC3 Modbus TCP | Communication with Modbus TCP devices (server and client functionality) |
| TF6255 | TC3 Modbus RTU | Serial communication with Modbus end devices |
| TF6270 | TC3 PROFINET RT Device | Communication via PROFINET (PROFINET slave) |
| TF6271 | TC3 PROFINET RT Controller | Communication via PROFINET (PROFINET master) |
| TF6280 | TC3 EtherNet/IP Slave | Communication via EtherNet/IP (EtherNet/IP slave) |
| TF6280 | TC3 EtherNet/IP Slave | Communication via EtherNet/IP (EtherNet/IP slave) |
| TF6281 | TC3 EtherNet/IP Master | Communication via EtherNet/IP (EtherNet/IP master) |
| TF6300 | TC3 FTP Client | Easy access from TwinCAT PLC to FTP server |
| TF6310 | TC3 TCP/IP | Communication via generic TCP server |
| TF6311 | TC3 TCP/UDP Realtime | direct access from realtime to Ethernet communication |
| TF6340 | TC3 Serial Communication | Communication via serial Bus Terminals or PC COM ports with the 3964R and RK512 protocol |
| TF6350 | TC3 SMS/SMTP | Sending SMS and e-mails from the PLC |
| TF6360 | TC3 Virtual Serial COM | Virtual serial COM driver for Windows platforms |
| TF6420 | TC3 Database Server | Accessing databases from the PLC |
| TF6421 | TC3 XML Server | Read and write access to XML files from the PLC |
| TF6500 | TC3 IEC 60870-5-10x | Communication according to IEC 60870-101, -102, -103, -104 |
| TF6510 | TC3 IEC 61850/IEC 61400-25 | Communication according to IEC 61850 and IEC 61400-25 |
| TF6600 | TC3 RFID Reader Communication | Connection of RFID readers to the TwinCAT PLC |
| TF6610 | TC3 S5/S7 Communication | Communication with S5/S7 controllers |
| TF8000 | TC3 BA Connectivity Library | Libraries for programming of Bus Terminals for building automation (LON, DALI, …) |
| TF8040 | TC3 Building Automation | Software package covering all technical building automation services |
| TR1xxx | Training, TwinCAT |
| TR2xxx | Training, TwinCAT NC |
| TR3xxx | Training, TwinCAT 3 |
| TR5xxx | Training, TwinCAT, Building Automation |
| TR5xxx | Training, Building Automation |
| TR8010 | Training, TwinCAT, TwinSAFE |
| TR8100 | EtherCAT evaluation workshop for slave developers |
| TR8110 | Training, EtherCAT technology basics for developers |
| TR8200 | EtherCAT Master Sample Code workshop for master developers |
| Training | Training program for Beckhoff system components |
| TS1010 | TwinCAT Eventlogger | Alarm and diagnostic system for managing and forwarding all messages (events) that appear in the TwinCAT system |
| TS1110 | TwinCAT Simulation Manager | Real-time simulation solution for the TwinCAT system |
| TS1120 | TwinCAT ECAD Import | Tool for importing the I/Os from an ECAD application into the TwinCAT System Manager |
| TS1140 | TwinCAT Management Server | Management Server for central administration of Beckhoff CE controls |
| TS1150 | TwinCAT Backup | TwinCAT Backup tool for backing up and restoring of files, operating system settings and TwinCAT settings |
| TS1500 | TwinCAT Valve Diagram Editor | Graphics-oriented editor for designing the characteristic curve of a hydraulic valve |
| TS1510 | TwinCAT Cam Design Tool | Graphical development tool for programming cam plates |
| TS1600 | TwinCAT Engineering Interface Server | Server for source code management programs, to access PLC projects, Microsoft Visual SourceSafe, CVS Subversion or PVCS in the source code management database |
| TS1800 | TwinCAT PLC HMI | Tool for developing visualisations under Windows NT/2000/XP/Vista, Windows 7 |
| TS1800-0030 | TwinCAT PLC HMI CE | Tool for developing visualisations under Windows CE |
| TS1810 | TwinCAT PLC HMI Web | Tool for developing web-based visualisations under Windows XP or CE |
| TS3300 | TwinCAT Scope 2 | Software scope for displaying TwinCAT variables as complex 2-D and 3-D graphics |
| TS3900 | TwinCAT Solar Position Algorithm | PLC library for the determination of the position of the sun |
| TS4100 | TwinCAT PLC Controller Toolbox | Software library for TwinCAT PLC with blocks for basic controllers, complex controllers, pulse width modulation, ramps, signal generators, filters |
| TS4110 | TwinCAT PLC Temperature Controller | Software library for TwinCAT PLC for implementation of a temperature controller |
| TS5050 | TwinCAT NC Camming | Software library for TwinCAT PLC for implementation of the cam plate functionality of TwinCAT NC |
| TS5055 | TwinCAT NC Flying Saw | Software library for TwinCAT PLC, for implementation of the “flying saw” functionality |
| TS5060 | TwinCAT NC FIFO Axes | Software library for TwinCAT PLC, permitting set value generation for an NC axis |
| TS5065 | TwinCAT PLC Motion Control XFC | Library for Motion Control applications with eXtreme Fast Control (XFC) |
| TS5066 | TwinCAT PLC Remote Synchronisation | Time synchronisation of information in distributed systems and special techniques for synchronising NC axes |
| TS511x | TwinCAT Kinematic Transformation | Realises different kinematic transformations for TwinCAT NC I |
| TS5220 | TwinCAT CNC Axes Pack |
| TS5230 | TwinCAT CNC Channel Pack |
| TS5240 | TwinCAT CNC Transformation |
| TS5250 | TwinCAT CNC HSC Pack |
| TS5260 | TwinCAT CNC Spline Interpolation |
| TS5270 | TwinCAT CNC Virtual NCK Basis |
| TS5271 | TwinCAT CNC Virtual NCK Options |
| TS527x | Virtual TwinCAT CNC for simulating a Windows environment |
| TS5800 | TwinCAT Digital Cam Server | Fast camshaft controller implemented in software in TwinCAT |
| TS5810 | TwinCAT PLC Hydraulic Positioning | Software library for TwinCAT PLC for controlling hydraulic axes |
| TS6100 | TwinCAT OPC UA Server | UA interface for automation, data exchange via OPC UA server |
| TS6100-0030 | TwinCAT OPC UA Server CE | UA interface for automation, data exchange via OPC UA server, Windows CE |
| TS6120 | TwinCAT OPC Server | Standard interface for automation, data exchange via OPC server |
| TS622x | TwinCAT EtherCAT Redundancy | Extends the TwinCAT EtherCAT master with cable redundancy capability |
| TS6250 | TwinCAT Modbus TCP Server | Communication with Modbus TCP devices (server and client functionality) |
| TS6250-0030 | TwinCAT Modbus TCP Server CE | TwinCAT Modbus server for communication with Modbus TCP devices, server and client functionality, Windows CE |
| TS6255 | TwinCAT PLC Modbus RTU | Software library for TwinCAT PLC with function blocks for serial communication with Modbus end devices |
| TS6270 | TwinCAT PROFINET RT Device | TwinCAT supplement for using every Beckhoff PC-based control system as a PROFINET slave |
| TS6271 | TwinCAT PROFINET RT Controller | TwinCAT supplement for using a standard Ethernet interface as PROFINET master on PCs and Embedded PCs |
| TS6280 | TwinCAT EtherNet/IP Slave | TwinCAT supplement for using every Beckhoff PC-based control system as an EtherNet/IP slave |
| TS6300 | TwinCAT FTP Client | Enables the TwinCAT PLC to access several FTP servers |
| TS6310 | TwinCAT TCP/IP Server | TwinCAT TCP/IP Server for communication with TCP/IP devices, server and client functionality |
| TS6310-0030 | TwinCAT TCP/IP Server CE | TwinCAT TCP/IP Server for communication with TCP/IP devices, server and client functionality for Windows CE |
| TS6340 | TwinCAT PLC Serial Communication | Software library for TwinCAT PLC for connection to serial devices |
| TS6341 | TwinCAT PLC Serial Communication 3964R/RK512 | Software library for TwinCAT PLC for communication via Bus Terminals or PC COM ports using the 3964R/RK512 protocol |
| TS6350 | TwinCAT SMS/SMTP Server | Server for sending SMS messages via mobile telephones and for sending e-mails via the Simple Mail Transfer Protocol |
| TS6350-0030 | TwinCAT SMS/SMTP Server CE | Server for sending SMS messages via mobile telephones and for sending e-mails via the Simple Mail Transfer Protocol for Windows CE |
| TS6360 | TwinCAT Virtual Serial COM Driver | Driver for the insertion of one or more EL60xx EtherCAT Terminals as normal serial interfaces (‘COMx’) in Windows CE or XP |
| TS6370 | TwinCAT DriveCOM OPC Server | Drive server for communication with DriveCOM devices |
| TS6371 | TwinCAT DriveTop Server | Configuration of Indramat SERCOS drives with DriveTop software on TwinCAT systems |
| TS6420 | TwinCAT Database Server | Database Server for logging of PLC data in a database |
| TS6420-0030 | TwinCAT Database Server CE | Database Server for logging of PLC data in a database for Windows CE |
| TS6421 | TwinCAT XML Data Server | XML Data Server for data exchange between an XML file and TwinCAT PLC |
| TS6421-0030 | TwinCAT XML Data Server CE | XML Data Server for data exchange between an XML file and TwinCAT PLC for Windows CE |
| TS6506-0030 | TwinCAT PLC IEC 60870-5-104 Master CE | realisation of masters for IEC 60870-104 under Windows CE |
| TS6507 | TwinCAT PLC IEC 60870-5-101, -104 Slave | realisation of slaves for IEC 60870-101, -104 |
| TS6507-0030 | TwinCAT PLC IEC 60870-5-104 Slave CE | realisation of slaves for IEC 60870-104 under Windows CE |
| TS6509 | TwinCAT PLC IEC 61400-25 Server | PLC library for communication according to IEC 61400-25 |
| TS650x | TwinCAT PLC IEC 60870-5-101, -102, -103, -104 Master | realisation of masters for IEC 60870-101, 102, -103, -104 |
| TS6511 | TwinCAT PLC IEC 61850 Server | PLC library for communication according to IEC 61850 |
| TS6600 | TwinCAT PLC RFID Reader Communication | For the connection of RFID readers to the TwinCAT PLC |
| TS6610 | TwinCAT PLC S5/S7 Communication | License for using the TwinCAT PLC S5/S7 Communication |
| TS8000 | TwinCAT PLC HVAC | HVAC library for automation of heating, ventilation, air-conditioning and sanitary installations in the area of building automation |
| TS8010 | TwinCAT PLC Building Automation Basic | Software library for TwinCAT PLC for execution of basic functions in the building automation area |
| TS8020 | TwinCAT BACnet/IP | Data communication protocol for building automation and control networks |
| TS8035 | TwinCAT FIAS Server | Software package for access to systems complying with the FIAS standard (Fidelio Interface Application Specification) |
| TS8036 | TwinCAT Crestron Server | For communication between a TwinCAT PLC and a Crestron control centre via Ethernet TCP/IP |
| TS8037 | TwinCAT Bang & Olufsen Server | For communication between a TwinCAT PLC and a Bang&Olufsen audio/video installation via Ethernet |
| TS8039 | TwinCAT PLC M-Bus |
| TS8040 | TwinCAT Building Automation | Software package covering all technical building automation services |
| TS8100 | TwinCAT Building Automation Framework | Development and commissioning of building automation applications |
| TwinCAT 2 | The Windows Control and Automation Technology |
| TwinCAT 3 | eXtended Automation Technology (XAT) |
| TwinCAT CNC Axes Pack | Expansion to a total of 64 axes/controlled spindles, of which a maximum of 32 can be path axes and a maximum of 12 can be controlled spindles |
| TwinCAT CNC Channel Pack | 1 further CNC channel, expandable to a maximum of 12 channels, channel synchronisation, axis transfer between channels |
| TwinCAT CNC HSC Pack | TwinCAT CNC implementation level for HSC (high-speed cutting) functionality. |
| TwinCAT CNC Spline Interpolation | path programming via splines with programmable spline type, Akima spline, B-spline |
| TwinCAT CNC Transformation | Transformation functionality (5-axis functionality), kinematics selection from kinematics library, RTCP function, TLC function, definition of various coordinate systems, linking/transition of coordinate systems |
| TwinCAT CNC Virtual NCK Basis/Options | Virtual TwinCAT CNC for simulating a Windows environment |
| TwinCAT PLC M-Bus | M-Bus (metering bus) library for logging consumption data (e.g. in water meters, electricity meters, gas meters, heat/cold meters, etc.) |
| TwinCAT Supplements | TwinCAT Supplements for System, Motion, Communication, Controller, Building Automation |
| TwinSAFE | TwinSAFE: safety and I/O technology in one system |
| TX1000 | TwinCAT CP | Driver for Windows programs and the Beckhoff Control Panel |
| TX1100 | TwinCAT I/O | I/O real-time software DLL for Windows NT/2000/XP/Vista, Windows 7 for exchanging data with Windows programs |
| TX1200 | TwinCAT PLC | IEC 61131-3 PLC automation software for Windows NT/2000/XP/Vista and Windows 7, programming environment for all Beckhoff controllers |
| TX1250 | TwinCAT NC PTP | PTP positioning software for Windows NT/2000/XP/Vista, Windows 7 with integrated IEC 61131-3 PLC TwinCAT PLC |
| TX1260 | TwinCAT NC I | Interpolation and PTP positioning software for Windows NT/2000/XP/Vista, Windows 7 with integrated IEC 61131-3 PLC TwinCAT PLC |
| TX1270 | TwinCAT CNC | Software CNC, CNC path control for tough requirements |
| U | |
| USB Bus Coupler K-bus | Bus Coupler for Universal Serial Bus (USB), BK9500 |
| X | |
| XAT | eXtended Automation Technology |
| XTS | eXtended Transport System |
| Z | |
| Z1000 | Bus Coupler accessories, standard Lightbus connector for 1000 µm plastic fibre |
| Z1003 | Bus Coupler accessories, Interbus/SERCOS interface FSMA connector for 1000 µm plastic fibre |
| Z1010 | Bus Coupler accessories, standard Lightbus connector for 200 µm PCS fibre |
| Z1020 | Bus Coupler accessories, Lightbus coupling for Z1000 |
| Z10xx | Optical fibre connector for Bus Coupler BK2xxx, Lightbus |
| Z11xx | Bus Coupler accessories, plastic optical fibres |
| ZB260x | Bus Terminal accessories, relay, 230 V AC, 16 A |
| ZB3100 | Bus Coupler accessories, PROFIBUS connector with switchable termination resistor |
| ZB3101 | Bus Coupler accessories, PROFIBUS connector with programming interface |
| ZB3200 | Bus Coupler accessories, PROFIBUS cable |
| ZB4100 | Bus Coupler accessories, Interbus, D-sub socket, 9-pin, for incoming remote bus |
| ZB4101 | Bus Coupler accessories, Interbus, D-sub plug, 9-pin, for outgoing remote bus |
| ZB4200 | Bus Coupler accessories, Interbus copper cable for Bus Coupler BK4xxx |
| ZB5100 | Bus Coupler accessories, CAN copper cable for Bus Coupler BK51xx |
| ZB5200 | Bus Coupler accessories, DeviceNet copper cable for Bus Coupler BK52xx |
| ZB8500 | EtherCAT accessories, clamp strap for shield connection |
| ZB8510 | EtherCAT accessories, shield busbar |
| ZB8511 | EtherCAT accessories, shield busbar clamp |
| ZB8520 | EtherCAT accessories, mounting rail holder for shield busbar |
| ZB8530 | EtherCAT accessories, U-clamp terminal |
| ZB85xx | Accessories, shielding connection system |
| ZB8700 | slot screwdriver |
| ZB8800 | Fieldbus Box accessories, dynamometric key |
| ZB8801 | Fieldbus Box accessories, torque wrench, adjustable |
| ZB900x | Fieldbus Box accessories, power lead, sensor lead |
| ZB90x0 | Bus Coupler accessories, industrial Ethernet/EtherCAT cable, CAT5e, 4-wires |
| ZK1010-xxxx | Bus Coupler accessories, ribbon cable for K-bus extension |
| ZK1020-0101-1000 | Fieldbus Box accessories, IP-Link connector |
| ZK1020-xxxx | Fieldbus Box accessories, IP-Link cable |
| ZK1031-xxxx | Fieldbus Box accessories, cordsets for PROFIBUS, Modbus, RS485 |
| ZK1052-xxxx | Fieldbus Box accessories, cordsets for CANopen, DeviceNet |
| ZK1090-31xx | EtherCAT Box accessories, EtherCAT fieldbus cables |
| ZK1090-9191-000x | Drive Technology accessories, EtherCAT patch cable |
| ZK1090-xxxx | Bus Coupler accessories, cable for K-bus extension |
| ZK1091-1001-00xx | EtherCAT accessories, fibre-optic cables for EK1501, EK1521 |
| ZK2000-xxxx | Fieldbus Box accessories, sensor lead |
| ZK2020-xxxx | EtherCAT Box accessories, power lead |
| ZK4000-22xx | Drive Technology accessories, resolver cables for Servomotors AM2000, AM3000, AM3500 |
| ZK4000-24xx | Drive Technology accessories, encoder cables for Servomotors ALxxxx |
| ZK4000-25xx | Drive Technology accessories, thermal protection cables for Servomotors ALxxxx |
| ZK4000-26xx | Drive Technology accessories, encoder cables for Servomotors AM2000, AM3000, AM3500, ALxxxx |
| ZK4000-5100-2xxx | Drive Technology accessories, encoder cables for Stepper motors AS1000 |
| ZK4000-6200-2xxx | Drive Technology accessories, motor cables for Stepper motors AS1000 |
| ZK4000-6700-2xxx | Drive Technology accessories, motor cables, shielded, for Stepper motors AS1000 |
| ZK450x-00yy-zzzz | Drive Technology accessories, motor cables for Servomotors AM2000, AM3000, AM8000, AL2000 |
| ZK450x-80xx-zzzz | Drive Technology accessories, motor cables for Servomotors AM804x to AM806x and AM883x to AM886x |
| ZK451x-00yy-zzzz | Drive Technology accessories, encoder cables for Servomotors AM3000, AM3500, AL2000 |
| ZK451x-01yy-zzzz | Drive Technology accessories, encoder cables for Servomotors AM2000 |
| ZK453x-00yy-zzzz | Drive Technology accessories, resolver cables for Servomotors AM2000, AM3000, AM3500, AM8000 |
| ZK4704-0411-xxxx | Drive Technology accessories, motor cables for servomotors AM3100 |
| ZK4724-0410-xxxx | Drive Technology accessories, encoder cables for servomotors AM3100 |
| ZK8500-8282-70x0 | Accessories for manual operating modules, ribbon cable, signal cable |
| ZS1000-xxxx | Fieldbus Box accessories for PROFIBUS, Modbus, RS232, RS485 |
| ZS1010-xxxx | Bus Coupler accessories, end plug for the KL8001 |
| ZS102x-0010 | Fieldbus Box accessories, IP-Link connector |
| ZS1031-xxxx | Fieldbus Box accessories for PROFIBUS, Modbus, RS232, RS485 |
| ZS1052-xxxx | Fieldbus Box accessories for CANopen, DeviceNet |
| ZS1090-0002 | Fieldbus Box accessories for Ethernet RJ45 plug |
| ZS1090-0003 | EtherCAT accessories RJ45 connector, 4-pin, IP 20, for field assembly |
| ZS1090-0004 | EtherCAT Box accessories, Ethernet D-coded M12 plug, field assembly |
| ZS2000-xxxx | EtherCAT Box accessories, sensor and power lead accessories for field assembly |
| ZS2001-000x | Bus Terminal accessories, connector for KM modules, EM modules, Extension Box IE2403 |
| ZS2010 | Bus Terminal accessories, connector for KS Bus Terminals, ES EtherCAT Terminals |
| ZS2020-xxxx | Fieldbus Box accessories, power distribution box |
| ZS3100-xxxx | Fieldbus Module accessories, PROFIBUS connector |
| ZS4000-20xx | Drive Technology accessories, connector for Servomotor ALxxxx, AM2000, AM3000, AM3500 |
| ZS4000-20xx | Drive Technology accessories, connector for Servomotor ALxxxx, AM2000, AM3000, AM3500 |
| ZS4000-2100 | Drive Technology accessories, metal flange for motor cable |
| ZS4000-2101 | Drive Technology accessories, metal flange for feedback cable |
| ZS4500-20xx | Drive Technology accessories, connector for Servo Drive AX5000 |
| ZS5x00-xxxx | EtherCAT Box accessories, marking material |